User`s guide

ManualsBrandsVax ManualsBlowerRevolution 53000 (version 2)

MODEL VS102

REVOLUTION PLUS

8.4 VOLTS

Please register your warranty.

Send in your completed Warranty Card.

If you require any further assistance or

advice about your VAX please call

VAXCARE on 1300 36 4040

(cost of a local call within Australia)

VAX Appliances (Australia) PTY LTD

A.C.N. 009099736

296 Victoria Road Malaga WA 6090.

Telephone: (08) 9247 8100

Fax: (08) 9247 8192

Email: vax@vax.com.au

Website: www.vax.com.au

WARRANTY

TROUBLE SHOOTING GUIDE

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

CHARGE THE VS102

FOR 16-20 HOURS

PRIOR TO FIRST USE

INSTRUCTIONS FOR USE

PROBLEM

SWEEPER WILL NOT

OPERATE

SWEEPER WILL NOT

PICK-UP

DUST ESCAPING

FROM SWEEPER

ROTATING BRUSH

WILL NOT PICK UP

SWEEPER WILL NOT

CHARGE

1. Batteries discharged.

2. No power in electrical outlet

supplying charging adapter.

3. Unit needs servicing.

1. Dust container is full.

2. Unit needs recharging.

1. Dust container is full.

1. Unit clogged.

2. Dust container is full.

1. Electrical outlet not working.

2. Charging Adapter not

working.

3. Batteries no longer

functioning.

1. Charge unit. Refer instructions

on page 4.

2. Check fuse or breaker.

Replace fuse/reset breaker.

3. Call VAXCARE.

1. Empty dust container.

2. Charge unit. Refer instructions

on page 4.

1. Empty dust container.

1. Check for excessive material

on brush or in bottom of

sweeper. Remove obstruction

from brushes and/or sweeper.

2. Empty and clean dust container.

Check to ensure outlet is

working properly. (Check by

plugging in another appliance).

2. Replace charging adapter

3. See battery removal/

disposal pg 7.

POSSIBLE REASON POSSIBLE SOLUTION

Summary of content (8 pages)

PAGE 1
TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION SWEEPER WILL NOT OPERATE 1. Batteries discharged. 2. No power in electrical outlet supplying charging adapter. 3. Unit needs servicing. 1. Charge unit. Refer instructions on page 4. 2. Check fuse or breaker. Replace fuse/reset breaker. 3. Call VAXCARE. SWEEPER WILL NOT PICK-UP 1. Dust container is full. 2. Unit needs recharging. 1. Empty dust container. 2. Charge unit. Refer instructions on page 4. DUST ESCAPING FROM SWEEPER 1.
PAGE 2
CORDLESS SWEEPER MODEL VS102 8.4V DC CLEANING THE DUST CONTAINER To achieve the best performance, empty the Dust Container after each use. 1. Pull the dust container straight out from the side. (Fig. 17). BATTERY REMOVAL NOTE: If uncertain as to how to remove the battery pack, we suggest you take your sweeper to an authorised VAX Service Agent to have this service performed. Follow these steps when battery removal is required. 1. Remove the extention handles and dust container. 2.
PAGE 3
• Use only as described in this manual. Use only manufacturer’s CHANGING THE ROTATING BRUSH, GEAR BOX AND SQUEEGEE WARNING: Use caution when changing the rotating brush and gear box so that the unit does not turn ON when pressing down on the sweeper power head. 1. Remove the extension tube handle from the sweeper power head. 2. Turn sweeper power head upside down being careful Not to accidentally turn the unit ON. 3. Remove the transparent brush cover. (Fig. 11) (Refer to page 7 for detailed instructions.
PAGE 4
. When recharging, make sure the unit is in the Off position. SWEEPER ASSEMBLY 1. Unpack and remove the whole unit from packaging. 5. Push the handle tubes and the upper handle together. (Fig.3) NOTE: One metal extension tube has a different black plastic insert. This tube should be inserted into the lower handle. insert into lower handle NOTE: The charging adapter, lower handle and edging tool are shipped inside the dust container. Pull the dust container straight out from the side. (see Fig.17 Pg.
PAGE 5
4. When recharging, make sure the unit is in the Off position. SWEEPER ASSEMBLY 1. Unpack and remove the whole unit from packaging. 5. Push the handle tubes and the upper handle together. (Fig.3) NOTE: One metal extension tube has a different black plastic insert. This tube should be inserted into the lower handle. insert into lower handle NOTE: The charging adapter, lower handle and edging tool are shipped inside the dust container. Pull the dust container straight out from the side. (see Fig.17 Pg.
PAGE 6
• Use only as described in this manual. Use only manufacturer’s CHANGING THE ROTATING BRUSH, GEAR BOX AND SQUEEGEE WARNING: Use caution when changing the rotating brush and gear box so that the unit does not turn ON when pressing down on the sweeper power head. 1. Remove the extension tube handle from the sweeper power head. 2. Turn sweeper power head upside down being careful Not to accidentally turn the unit ON. 3. Remove the transparent brush cover. (Fig. 11) (Refer to page 7 for detailed instructions.
PAGE 7
CORDLESS SWEEPER MODEL VS102 8.4V DC CLEANING THE DUST CONTAINER To achieve the best performance, empty the Dust Container after each use. 1. Pull the dust container straight out from the side. (Fig. 17). BATTERY REMOVAL NOTE: If uncertain as to how to remove the battery pack, we suggest you take your sweeper to an authorised VAX Service Agent to have this service performed. Follow these steps when battery removal is required. 1. Remove the extention handles and dust container. 2.
PAGE 8
TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION SWEEPER WILL NOT OPERATE 1. Batteries discharged. 2. No power in electrical outlet supplying charging adapter. 3. Unit needs servicing. 1. Charge unit. Refer instructions on page 4. 2. Check fuse or breaker. Replace fuse/reset breaker. 3. Call VAXCARE. SWEEPER WILL NOT PICK-UP 1. Dust container is full. 2. Unit needs recharging. 1. Empty dust container. 2. Charge unit. Refer instructions on page 4. DUST ESCAPING FROM SWEEPER 1.