--- Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 OQH, UK email: info@vax.co.uk - website: vax.co.uk Version 1.
User Guide Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 White stick steam mop White Get cleaning... What’s your Vax model number? (Located on the flap of the packaging) e.g. S 8 8 - W 1 M - B What’s your serial number? – (Located on the base of the machine) – – – – Note these down in case you need them in future. Please keep instructions for further use. vax.co.
Machine Overview 1 Handle 2 Connector tube 3 Power Indicator light Green = Unit on Red = Clean water tank empty 4 Clean water tank 5 Floor head 6 Upper cord wrap 7 Cord 8 Lower cord wrap 9 On/off button 10 Clean water tank cap Unit 6 1 7 8 2 3 9 10 4 5 11 12 13 14 Funnel Measuring jug (inc.
General Safety Information FOR HOUSEHOLD USE ONLY. 19. The steam mop must be kept level during operation. When using the steam mop, basic safety precautions should always be observed, including the following: 20. Never immerse the steam mop in water or in other liquids. 21 Do not operate the steam mop without water in the tank. Always top up with water in good time. 22 Always remove the mains plug from the socket and allow the steam mop to cool down completely before topping up with water.
- Operation Assembling your steam mop To reduce the risk of personal injury, unplug the steam mop when assembling. Insert the handle into the connector tube at the top of your steam mop. Ensure the locking tab locks into place (you should hear a click). Before you begin cleaning IMPORTANT: Do not use hot or boiling water to fill clean water tank. Do not overfill the water tank. Always ensure there is water in the clean water tank.
Operation Steam cleaning hard floors Vacuum floors throughly before using the steam mop. Never leave the steam mop in one spot on any surface for an extended period of time with a damp or wet microfibre cleaning pad attached as this may damage the floor surface. Your steam mop should only be used on sealed floors including tiles, lino, wood flooring and laminate. Do not operate/use steam mop without water in clean water tank.
- Maintenance (Keep your Vax as good as new) Storage IMPORTANT: Allow the unit to fully cool down before performing any maintenance or troubleshooting checks. Empty out any remaining water in the tank and clean the external surface with a dry cloth. Empty the water tank IMPORTANT: Allow the unit to fully cool down before performing any maintenance or troubleshooting checks. Important: Ensure unit has fully cooled before emptying and storing To empty the tank, press release button and remove handle.
Maintenance (Keep your Vax as good as new) Replacing the hard water filter IMPORTANT: The condition of the filter will affect the performance of your machine. Your measuring jug is fitted with a hard water filter. Depending on water hardness and/or frequency of use, the filter should be changed every 6 months. Remove the hard water filter from the measuring jug. vax.co.uk Remove filter from the holder and replace with the new filter.
- FAQs To reduce the risk of personal injury, unplug the steam mop before performing maintenance or trouble shooting checks. Is there an accessory missing? Why is the steam mop not producing steam? • Check the Parts Overview page in the guide to make sure the part is definitely included in your unit. • There may be no water in the tank; please refer to the operation section. • If the part is missing we’re here to help.
Other Information UK Service & Help Any queries or concerns about using your Vax, simply visit; vax.co.uk/support - vaxireland.ie or, call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Monday-Friday 8.30am to 6.30pm Saturday 9.00am to 5.00pm Consumables To purchase spares and accessories, please visit vax.co.
- Notes 10 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Notes vax.co.
