Operation Manual

Using the funnel and measuring

jug, fill the clean water tank, noting

MAX fill water level (on front of

unit). Replace cap.

Twist and pull the cap to access

the clean water tank.

Operation

Insert the handle into the connector

tube at the top of your steam mop.

Ensure the locking tab locks into

place (you should hear a click).

Assembling your steam mop

Before you begin cleaning

To reduce the risk of personal injury, unplug the steam mop

when assembling the accessories.

Attach cleaning pad to the

floor head.

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

IMPORTANT: Never use the steam mop

without the microfibre cleaning pad

correctly attached to the floor head.

IMPORTANT: Do not use hot or boiling water to fill clean

water tank. Do not overfill the water tank.

To reduce the risk of personal injury, unplug the steam mop when assembling.

Attaching the microfibre cleaning pad

Always ensure there is water

in the clean water tank.

IMPORTANT:

1 x 280ml water

tank = 10 mins steaming time

Tighten the drawstring so the

microfibre cleaning pad is

fitted securely.