Specifications

59
Caveats for Cisco IOS Release 12.0
78-6455-12
Resolved Caveats—Cisco IOS Release 12.0(8)
• CSCdp04887
An Advanced Peer-to-Peer Networking/Dependent LU Requester (APPN/DLUR) router might
reload with the following stacktrace:
RA: 0x60703538[h(0x6070345c)+0xdc]
RA: 0x607038E0[fsm_receive_router(0x607035b0)+0x330]
RA: 0x606E285C[upchuck(0x606e2654)+0x208]
RA: 0x606E2348[rcv_cls_msg(0x606e2080)+0x2c8]
RA: 0x606E1ED8[dlcdx_process_messages(0x606e1eb8)+0x20]
RA: 0x607027D0[xxxpcasm(0x60702440)+0x390]
There is no workaround.
• CSCdp09801
An Advanced Peer-to-Peer Networking (APPN) router might reload in cs_process_lsa_ips during
a link activation and deactivation timing window. There is no workaround.
• CSCdp14927
If both a primary Dependent LU Server (DLUS) and a backup DLUS are configured on an
Advanced Peer-to-Peer Networking/Dependent LU Requester (APPN/DLUR) router, the router
might unnecessarily time out an allocate to one DLUS after having to time out an allocate to the
other DLUS. When this situation occurs, you will receive an “allocate has an invalid rcb 0. Restart
TP.” message.
Workaround: Enter the prefer-active-dlus configuration command with the “no retries” operand.
If you have prefer-active-dlus coded on the APPN control point with no retries, only the currently
active DLUS will be retried. This is a temporary workaround.
• CSCdp17578
An Advanced Peer-to-Peer Networking (APPN) router might experience a memory leak if you save
the Routing Information Field during link activation. There is no workaround.
• CSCdp24638
If you are running source-route bridging (SRB) over Frame Relay (RFC 1490), the following
traceback appears on the console:
%LINK-3-BADMACREG: Interface Serial1.50, non-existent MACADDR registry for link 43
-Process= “LanNetMgr Supt”, ipl= 0, pid= 76
-Traceback= 6080DA8C 6080D8FC 60DEBE1C 60DE04B8 60DFA820 60DFAA60 6031A984 6031A970
There is no apparent impact.
Workaround: Enter the lnm disabled global configuration command.
Interfaces and Bridging
• CSCdk74973
When used with a channelized serial interface (CT1/CE1), compression service might be
interrupted if there is any system-wide service interruption like online insertion and removal (OIR)
or micro reload. There is no workaround.
• CSCdm35733
FEBE line and path counters on a POS interface might not increment with the following images:
rsp-jv-mz.111-18.CC.bin, rsp-jv-mz.111-24.CC.bin, and rsp-jsv-mz.120-3.0.2. There is no
workaround.