Instruction manual

6
Troubleshooting
8. Troubleshooting
WWAARRNNIINNGG::
TO REDUCE RISK OF PERSONAL INJURY UNPLUG VACUUM CLEANER BEFORE SERVICING
PROBLEM: Cleaner won’t run
Cause: Not properly plugged into electrical outlet.
Solution: Plug cord in firmly.
Cause: Blown fuse or tripped beaker.
Solution: Check fuse or breaker. Replace fuse/breaker
PROBLEM: Cleaner won't pick up/loss of suction
Cause: Lower hose not connected properly.
Solution: Refer to page 3 for fitting information.
Cause: Dirt container not installed correctly or full.
Solution: See ‘Emptying the dirt container”.
Cause: Broken or worn belt.
Solution: Replace the belt.
Cause: Clogged filter.
Solution: Remove filter and clean.
Cause: Nozzle/hose or hose inlet is clogged.
Solution: Remove Nozzle/hose and obstruction.
PROBLEM: Dust escaping from the Vacuum
Cause: Dirt container full.
Solution: Empty dust canister.
Cause: Dirt container not installed properly.
Solution: See ‘Emptying the dirt container’.
Cause: Hose not installed properly.
Solution: See ‘putting your vacuum cleaner together’.
VS_19TL_Artwork.qxd 3/5/06 17:26 Page 7