Instruction manual

3. How to Assemble

IMPORTANT: Always remove the power plug from

the electrical outlet before assembling or before

removing accessories.

Tool required: Phillips screwdriver.

1. Slide the back panel onto the base (Fig.3/1).

2. To secure, insert the two (2) screws into the front

of the back panel (Fig.3/2).

3. Slide the end of the hose onto the back panel

inlet. Turn anti-clockwise to secure (Fig.3/3).

4. Align the carry handle holes with the holes on the

back panel. Slide the handle forward. Insert two

(2) screws into the holes and tighten until secure

(Fig.3/4).

5. Place the upper handle onto the upright back

panel (Fig.3/5).

6. Attach the TurboTool® clip into the TurboTool®

caddy (Fig.3/6).

7. Place the TurboTool® caddy onto the front of the

vacuum lower handle (Fig.3/7).

Fig.3/1

Fig.3/6

Fig.3/4

Fig.3/2

Fig.3/3

How to Assemble

Fig.3/5

Fig.3/7

Vax V-006 D5 BF 7/1/05 12:13 PM Page 4