Specifications

EISA and ISA Bus Support
14.7 EISA Bus Support on DEC 2000
Figure 14–5 DEC 2000 ADP List
DEC 2000 ADP List
IOC$GL_ADPLIST
child
System ADP
EISA ADP
TR = 1 adptypee = AT$KA0602
EISA
Bus Array
ZK−6744A−GE
TR = 2 TR = 3
header
6
entries
adptype = AT$_EISA
peer
adptypo = AT$_COMBO
bustype = BUS$_EISA
COMBO Chip
Bus Array
header
6
entries
bustype = BUS$_COMBO
SCSI
Bus Array
header
SCSI Adapter
Floppy Drive
TR = 4
bustype = BUS$_EISA
child
AHA1742A
ADP
adptype = AT$_AHA_1742A
Combo
Chip ADP
14.7.8 Configuring a Device on DEC 2000
If your device is not supported by the Bus Support code on DEC 2000, it will
need to be manually configured. The method to do this is similar to all other
AXP platforms, with the exception of the CRB$L_NODE field. Below is given the
command to issue in order to configure a device and load the driver for an EISA
adapter. Each of the command parameters is discussed in detail.
$ MCR SYSMAN IO CONNECT xxA0 /driver=sys$xxdriver
/vector=(irq*4)
/node=%x000z000a
/adap=2
/csr=b
Specify the device name and driver name as you would for any system.
14–20