Performance Floor2Floor Let’s get started U86-PM Series vax.co.
Let’s talk safety Basic safety precautions This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Thank you for buying this Performance Floor2Floor. Taking care of your carpets The Performance Floor2Floor is designed to make vaccuming carpets regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets will ensure they keep their appearance for longer . You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.
Contents Let’s talk safety Getting to know your machine Getting started Performance Floor2Floor Included with your machine 2 in 1 tool Pre-motor filter Using your machine Post-motor filter Taking care of your machine Let’s talk technical What to do if it goes wrong Getting in touch Notes + Floor2Floor Pet TurboTool + Floor2Floor Total Home Flexi-crevice tool Flat upholsery tool TurboTool
Getting to know your machine Handle Extension tube Dirt container release button Handle release button Power on / off button Hose Pre-motor filter Quick release cord hook Separator Dirt container Post-motor filter Hose to machine connector Carpet height adjuster Technical Specification Accessories & Consumables Name Performance Floor2Floor Voltage 220-240V~50Hz Wattage 1600W Cord length 8/10m Weight 6.
Getting started PLEASE READ ‘Let’s talk SAFETY’ AT THE BEGINNING BEFORE USE Assembling your upright Insert the back panel into the floorhead Insert the lower cord hook into the hole at the bottom of the back panel Place dirt container on machine and click into place at the back panel Inset the handle into the top of the back panel until it clicks into place *Not applicable for all models Now take the small Place the dirt container onto the machine.
Using your machine Before you begin cleaning • Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. • The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off and unplug from electrical socket.
P TA Taking care of your machine Emptying and cleaning the dirt container Press dirt container release button to remove the dirt container Hold the dirt container over a bin and unclip the lock on the bottom of the dirt container, allowing the dirt to fall out Close the base of the dirt container and click the dirt container back on to the back panel Cleaning the pre motor filter P TA Place fingers under the catch of the dirt container lid and pull to release it The lid will lift on a hinge 40˚C MAX
Taking care of your machine Cleaning the shroud 40˚C MAX Place fingers under the catch of the bin to dirt container lid and pull to release it Remove the pre-motor filter to allow access to the shroud Tap the shroud over the bin to release dirt 24hr Wash the shroud under running water and leave to dry.
Let’s talk technical Removing debris from the brushbar Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar Removing blockages from the TurboTool* 1 1 11 2 222 3 333 Vacuuming the stairs Ensure that the vacuum is upright at the top or bottom of the stairs while vacuuming.
Let’s talk technical Changing the belt Switch off your vacuum cleaner at the main socket and unplug. Remove the 6 screws on the bottom of the floorhead Squeeze the sides of the floor plate to release it Remove the floor plate Remove the belt cover Changing the belt Lift the brush from the machine starting at the side without the belt on Feed the other side into the belt compartment Unhook the belt from the motor spindle in the belt compartment.
What to do if it goes wrong Problem Why won’t the vacuum cleaner turn on? Why won’t the vacuum cleaner pick up? Solution • The plug may not be fully pushed into the electrical socket • Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse • The motor thermostat may have tripped. If this has happened, unplug the vacuum cleaner.
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator. Flexi Crevice Tool 1-1-131393-00 A handy long, flexible tool for getting far behind and around furniture.
Notes
@VaxUK Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Version 2.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the Dual Power series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.