Impact 502 Let’s get started U86-IN-(Be, Pe) vax.co.
Let’s talk safety Basic safety precautions This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • Only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing from moving parts and openings whilst using the vacuum cleaner.
Don’ts 8 Don’t attempt to remove blockages with sharp objects as this may cause damage to your vacuum cleaner. 8 Don’t vacuum up hard or sharp objects such as glass, nails, screws or coins etc. 8 Don’t use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label. Do’s 3 Turn off all controls on the vacuum cleaner before disconnecting or connecting the power cord.
Thank you for buying this Impact 502. Taking care of your carpets and hard floors The Impact 502 is designed to make vacuuming regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard floors will ensure they keep their appearance for longer and Vax will help you take good care of them.
Contents Let’s talk safety Impact 502 Getting to know your machine Included with your machine Getting started Hard floor tool Using your machine Taking care of your machine Extension hose 1.5m Dusting brush Let’s talk technical What to do if it goes wrong Crevice tool Extension tube Getting in touch Accessories Notes Initial Setup for normal operation 1. Use the base accessories. a. Shortest hose b. Extension tube set to shortest practicable length. 2. Clean filters installed. 3.
Getting to know your machine Handle Turbo tool holder (some models only) Carry handle Dust brush holder Dirt container release button Handle release button HEPA pre-motor filter (hidden) Upper release cord hook Dirt container lid Extension tube and crevice Hose inlet Dirt container Separator Dirt release clip On/off button Hose connector Height adjuster dial Technical Specification Accessories & Consumables Name Impact 502 Voltage 220-240V-50Hz Wattage 900W Cord length 8m Weight 5.
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin cleaning WARNING: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments or removing and emptying the dirt container IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off. If this happens switch the vacuum cleaner off and unplug from electrical socket.
Using your machine IMPORTANT: Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/ attachments, or removing and emptying the dirt container. The accessories can be attached to the extension tube or directly to the hose. When using accessories on the hose/extension tube raise the height adjuster to the highest setting. Plug vacuum cleaner into the mains, switch on. Turn brush bar height adjuster dial to desired setting. Press On/Off button to switch on.
Using your machine Using on the stairs WARNING Hold vacuum cleaner with brush bar over tread of stairs. This vacuum cleaner has a constantly rotating brush bar. When cleaning on stairs raise the height adjuster dial to the highest setting. The brush bar must overhang the stair tread. Always take care when cleaning stairs. Hard floor cleaning Always raise the height of the brush bar to hard floor setting when using the vacuum cleaner on lino and hard floor.
Taking care of your machine IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the filters. Wash the pre-motor filters with warm water (40°C max) and leave for 24 hours or until fully dry before replacing into the machine. Filters require cleaning at least every 3-6 months (depending on the level of use).
Taking care of your machine Cleaning the separator Turn separator anti‑clockwise to ‘unlock’, pull to remove. Tap separator over a bin to remove any dirt/debris. Using a soft brush clean any dirt/debris out of the separator. Line up tabs on separator with dirt container, turn separator clockwise to ‘lock’ and click into place. The separator should sit on seal in bottom of dirt container when correctly fitted. Cleaning the post motor filter Press post motor filter cover clip, pull to remove.
Taking care of your machine Storing extension hose on vacuum cleaner (optional) Remove hose end from the floor head. Attach accessory hose to extension hose. Wrap hose around hose guide. Over and behind carry handle. Into hose to machine connector.
Let’s talk technical IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. Removing debris from the brushbar Using a pair of scissors remove any threads or hair caught around the brush bar. Removing dirt/debris from TurboTool (some models only) Slide the locking ring to remove. Lift and separate the housing. Using a pair of scissors cut any hair or debris free from around the brushes. Line up the tabs on front of the housing and re-fit.
Let’s talk technical Removing a blockage from the hose Remove hose end from the floor head. Lift clip under the hose inlet. Pull latch out and remove hose. Line up latch, push until it clicks into place. TIP: Test for blockages by dropping a small ball of paper through the those. Remove any blockage by inserting wire coat hanger into hose. Replacing the belt Lie vacuum cleaner on its back exposing brush bars. Use a cross head screwdriver. Undo 5 screws Lift to remove brush bar cover.
What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your vacuum cleaner. Is there an accessory missing? Why does my vacuum cleaner have no power? Why won’t the vacuum cleaner pick up? • The plug may not be fully pushed into the electrical socket. • Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse. • The motor thermostat may have tripped.
Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit (Type 2) 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator.
Notes
Notes
@VaxUK Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Version 1.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the U86-IN-(Be, Pe) series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.