Owner`s manual

DRAFT
Example 2–1 (Cont.): Record System Parameters
>>> SHOW ALL
3
Type Rev ! Lists all system parameters,
1+ KA65A (8080) 0008 ! beginning with the system
2+ KA65A (8080) 0008 ! configuration
9+ MS65A (4001) 0002
A+ MS65A (4001) 0002
D+ DWMBB/A (2001) 0002
E+ DWMBB/A (2001) 0002
XBI D
1+ DWMBB/B (2107) 000A
2+ CIBCA-B (0108) 41C2
4+ DEBNI (0118) 0100
XBI E
1+ DWMBB/B (2107) 000A
2+ DEBNI (0118) 0100
4+ KDB50 (010E) 0F1C
6+ TBK70 (410B) 0307
Current Primary: 1 ! Shows the status of CPUs
/NOENABLED-
/NOVECTOR_ENABLED-
/NOPRIMARY-
! Shows the memory interleave
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
. . . . A2 A1 . . . . . . . . ILV
. . . . 128 128 . . . . . . . . 256 Mb
/INTERLEAVE:DEFAULT
/SCOPE /SPEED: 9600 /NOBREAK
English
XMI:D BI:4 08-00-2B-0B-8E-94
XMI:E BI:2 08-00-2B-15-7F-C3
DEFAULT /XMI:E /BI:4 DU0
>>>
To print the console terminal output, use the Print Screen key (the second
key at the top left of the keyboard) on the VT320 terminal. Store these
printouts in the Site Management Guide for later reference.
1
At the console prompt, enter INIT to reset the entire system. The
power-up self-test shows configuration and interleave information.
2
For Model 500 and 600 processors, use SHOW FIELD; it includes
information on the power system, which is not included in the SHOW
ALL command.
3
Use SHOW ALL to record all other relevant information.
Preparing for the Installation (All Upgrades) 2–3