Owner`s manual

DRAFT
Contents
Preface vii
Chapter 1 Introduction
1.1 KA66A Upgrade Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
1.2 Upgrading a System without +3.3V Power . . . . . . . . . . . . . . . 1–4
Chapter 2 Preparing for the Installation (All Upgrades)
2.1 Record System Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
2.2 Shut Down the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4
2.3 Remove Old Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
2.4 Return Old Processor Modules . . . . . . . . . . . . . . . . . . . . . . . . 2–8
2.5 Continuing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9
Chapter 3 Upgrading a Model 300 or 400 with +3.3V: Removing
the +3.3V Inhibit Cable
Chapter 4 Upgrading a System without +3.3V by Installing an
H9657-CX Kit
4.1 Contents of the H9657-CX Kit . . . . . . . . . . . . . . . . . . . . . . . . 4–2
4.2 Configuration Rules for the H9657-CX Kit . . . . . . . . . . . . . . . 4–4
4.3 Installing the Bus Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
4.4 Installing the T2019 Module . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
iii