Owner`s manual

DRAFT
4.4 Installing the T2019 Module
The T2019 power regulator module transforms the +5V
supplied to the XMI backplane to the +3.3V needed by the
KA66A processor. Install the T2019 in slot 2 of the XMI cage.
Figure 4–4: Installing the T2019 Power Regulator Module
ZIF
CONNECTOR
SEGMENTS
msb-0702C-90
SELF-TEST
LEDs
T2019
SIDE VIEW ENLARGED
4–8 VAX 6000: Installing Model 600 Processors