Owner`s manual

DRAFT
Chapter 5 Installing the KA66A Processor (All Upgrades)
5.1 Inserting the KA66A Processor in the XMI Card Cage . . . . . 5–2
Chapter 6 Verifying the System (All Upgrades)
6.1 Verification Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2
6.2 Power Up the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–4
6.3 Examine the Power-Up Test Display . . . . . . . . . . . . . . . . . . . 6–6
6.4 Set System Parameters (Mandatory) . . . . . . . . . . . . . . . . . . . 6–8
6.5 Run EVUCA to Apply Current ROM and PCS Patches
(Mandatory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–10
6.6 Print System Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–18
6.7 Save EEPROM to Tape (Optional) . . . . . . . . . . . . . . . . . . . . . 6–20
6.8 Verify System Under Operating System . . . . . . . . . . . . . . . . . 6–21
6.9 Change System Number Plate . . . . . . . . . . . . . . . . . . . . . . . . 6–22
Appendix A VAX 6000 Model 600 General Configuration Rules
A.1 General Configuration Rules . . . . . . . . . . . . . . . . . . . . . . . . . A–2
Appendix B Description of KA66A LEDs
B.1 Overview of KA66A LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2
B.2 Determining Failing Test from LEDs . . . . . . . . . . . . . . . . . . . B–4
Index
Examples
2–1 Record System Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
6–1 Power-Up Test Display for Upgrade from 610 to 620 . . . . . . . 6–6
6–2 Power-Up Test Display for an H9657-CX Upgrade . . . . . . . . . 6–6
6–3 Setting the System Serial Number and Parameters . . . . . . . 6–8
6–4 Using VAX/DS to Run EVUCA to Patch EEPROMs on All
Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–10
6–5 Using VAX/DS to Run EVUCA to Patch EEPROM on All
Modules (Part 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–12
iv