Owner`s manual

DRAFT
Example 6–6: Using VAX/DS to Run EVUCA to Patch EEPROM on All
Modules (Part 3)
DS> LOAD EVUCA
8
.
.
.
[Copyright banner prints]
DS> SELECT ALL
9
DS> SET TRACE
10
DS> START
11
.. Program: EVUCA - VAX 6000 EEPROM Update Utility, revision 2.0, 5 tests,
at 00:04:03.27.
Testing: _KA0
Please put the front panel switch in the update position.
12
Press <RET> when ready.
Test 2: Load data from media
Data file? <EXUCA.BIN>
13
Searching for data file...
Data file loaded.
Looking for patch for CPU 09 - ROM 1.00 EEPROM 1.00.
Patch image is revision 01.01
Do you really want to apply this patch [(No), Yes] yes
14
Test 3: Determine Typecodes Updated
Test 4: Update EEPROM data
Getting selectable boot primitives for CPU 09, ROM 1.00
Updating CPU 09
Primary CPU 09 Done
6–14 VAX 6000: Installing Model 600 Processors