Owner`s manual

DRAFT
8
Load the EVUCA program to check for patch revision and request patch
updates.
9
Type SELECT ALL to request that all processors be checked. In this
case, there is only one at XMI node 9, as will appear later in the listing.
10
The SET TRACE command requests that VAX/DS display information
on the console terminal so that you can tell when a test is running.
11
Type START to begin execution of the EVUCA program.
12
This request only appears if the front panel switch is not in the
UPDATE position. The program will wait until you turn the switch,
and then type RETURN to continue the program.
13
Type EXUCA.BIN, the name of the file on the diagnostic media
containing the patches for the processors. The file is loaded, and its
information checked against current information in EEPROM. In this
case, the EEPROM revision is 1.00 and the patch on the diagnostic
media is 01.01, a later revision.
14
EVUCA prompts to see if you want to apply the patch. The default is
NO. Type yes to apply the patch.
In the example, the patch is made to CPU 09 (the only one in this
example), and EVUCA displays status information to that effect.
Verifying the System (All Upgrades) 6–15