Owner`s manual

DRAFT
6.6 Print System Parameters
Using the SHOW FIELD and SHOW ALL commands, print
the system parameters in effect for this system. Using
console commands, print the parameters to the console
terminal printer and save the printout in two places: the
maintenance envelope attached to the back door of the
cabinet and in your Site Management Guide.
Example 6–8: System Parameters Printout
1
>>> SHOW FIELD
Saved boot specifications:
DEFAULT /XMI:E /BI:4 DU0
Console terminal parameters:
/SCOPE /SPEED: 9600 /BREAK
Console error message language mode:
English
Memory configuration:
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
. . . . . A2 A1 . . . . . . . ILV
. . . . . 128 128 . . . . . . . 256 Mb
/CONSOLE_LIMIT:01000000
/INTERLEAVE:DEFAULT
Power system: A
System serial number: SG01234567
2
>>> SHOW ALL
Type Rev
3+ KA66A (8087) 0008
4+ KA66A (8087) 0008
5+ KA66A (8087) 0008
6+ KA66A (8087) 0008
8+ MS65A (4001) 0084
9+ MS65A (4001) 0084
D+ DWMBB/A (2001) 0002
E+ DWMBB/A (2001) 0002
XBI D
1+ DWMBB/B (2107) 000A
2+ CIBCA-B (0108) 41C2
4+ DEBNI (0118) 0100
Example 6–8 Cont’d on next page
6–18 VAX 6000: Installing Model 600 Processors