Owner`s manual

DRAFT
Example 6–8 (Cont.): System Parameters Printout
XBI E
1+ DWMBA/B (2107) 000A
2+ DEBNI (0118) 0100
4+ KDB50 (010E) 0F1C
6+ TBK70 (410B) 0304
Current Primary: 3
/NOENABLED-
/NOPRIMARY-
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
. . . . . A2 A1 . . . . . . . . ILV
. . . . . 128 128 . . . . . . . . 256 Mb
/CONSOLE_LIMIT: 01000000
/INTERLEAVE:DEFAULT
/SCOPE /SPEED: 9600 /BREAK
English
XMI:D BI:4 08-00-2B-0B-8E-94
XMI:E BI:2 08-00-2B-15-7F-C3
DEFAULT /XMI:E /BI:4 DU0
For future troubleshooting and maintenance, record system parameters.
This step is especially important for single-processor systems and systems
that have a CD load device. Use hardcopy printout and save the printout
in two places: the maintenance envelope attached to the back door of the
cabinet and in your Site Management Guide.
1
SHOW FIELD
Enter the SHOW FIELD command at the console prompt. This display
includes the system serial number and power system, which are not
included in the SHOW ALL command.
2
SHOW ALL
Use the SHOW ALL command to record all other relevant information for
the system for future reference.
Verifying the System (All Upgrades) 6–19