Owner`s manual

DRAFT
6.8 Verify System Under Operating System
After you have started the operating system, run any
appropriate tests. For VMS, as noted in Chapter 2, you need
to have Version 5.4 or later to be able to use the Model 600
processors. With VMS, you can use a set of programs called
UETP (User Environment Test Package). First log in and
check the devices. Then start the tests.
Example 6–10: Running UETP
Username: SYSTEST
1
Password:
$ @UETP
2
Welcome to VAX/VMS UETP Version V5.3
3
Run "ALL" UETP phases or a "SUBSET" [ALL]?
How many passes of UETP do you wish to run [ 1 ]?
How many simulated user loads do you want [145]?
Do you want Long or Short report format [Long]?
UETP starting at 14-NOV-1991 13:12:23.00 with parameters:
DEVICE LOAD DECNET CLUSTER phases, 1 pass, 145 loads, long report.
1
Enter SYSTEST as the username. Obtain the password from the
system manager. After you log in, check all devices.
2
Enter the command @UETP to start the program.
3
The VAX/VMS UETP banner appears and UETP prompts you with
questions. The default answer for each question is in square brackets.
Press Return if you wish to enter the default answer. UETP testing
begins when the final question is answered. For more information,
refer to VMS Upgrade and Installation Supplement: VAX 6000 Series.
Verifying the System (All Upgrades) 6–21