Owner`s manual

DRAFT
Index
B
Battery backup
comparison of H9657-CX and -CU
upgrades, 1–5
Booting VAX/DS, 6–10
Bus bar, 4–2
installation, 4–6 to 4–8
C
Compatibility issues, 2–7
Configuration rules
H9657-CX, 4–4 to 4–5
processor, A–2
Console commands
INITIALIZE, 6–6
SAVE EEPROM, 6–18
SET BOOT, 6–8
SET POWER, 6–8, 6–9
SET SYSTEM SERIAL, 6–8
SHOW ALL, 6–19
SHOW FIELD, 6–18
SHOW SYSTEM SERIAL, 6–9
UPDATE, 6–8
D
Diagnostic Supervisor, 6–10
Door slug replacement, 6–23
DWMBA/A modules, 5–3
DWMBB/A modules, 5–3
E
EEPROM
copying contents, 6–20
saving after installation, 6–20
saving parameters, 6–20
EEPROM (Cont.)
setting parameters, 6–20
updating, 6–8
EVUCA, 6–10
H
H7231-N battery backup, 1–5
H7236-A battery backup unit, 1–5
H7242 power inhibit cable, 3–1
H7242 power regulator, 1–5
H9657-CU upgrade kit
compared with H9657-CX, 1–4
H9657-CX upgrade kit, 1–3
bus bar, 4–7
compared with H9657-CU, 1–4
configuration rules, 4–4 to 4–5
installation, 4–1 to 4–9
kit contents, 4–2 to 4–3
T2019 module, 4–8
I
Installation of KA66A modules, 5–1
to 5–3
K
KA66A processor
general information, 1–1 to 1–5
installing, 5–1 to 5–3
LEDs, B–1 to B–5
power requirement, 1–1
upgrade paths, 1–2
verification, 6–1 to 6–23
L
LEDs
Index–1