Owner`s manual

DRAFT
LEDs (Cont.)
processor error, B–1 to B–5
T2019 power regulator module,
4–9
M
Memory interaction tests, 6–6
Module return, 2–8
Multiprocessor tests, 6–6
P
Patching ROM and PCS, 6–10
PCS
patching, 6–10
Power inhibit cable, 3–1
Power required by KA66A, 1–1
Power-up, 6–4
Power-up test display, 6–6
examples, 6–6
line ETF, 6–7
line STF, 6–7
line XBI, 6–7
Preparation for installation, 2–1 to
2–9
Printout of system parameters, 2–2
to 2–3, 6–18
Processor
configuration rules, 4–4, A–2
installation, 4–1 to 4–9
LEDs, B–1 to B–5
verification, 6–1 to 6–23
R
Removal of old modules, 2–6
Return of old modules, 2–8
ROM
patching, 6–10
S
SAVE EEPROM command, 6–20
Self-test
at power-up, 6–6
SET BOOT command, 6–8
SET POWER command, 6–8
options, 6–9
SET SYSTEM SERIAL command,
6–8
SHOW ALL command, 2–3, 6–19
SHOW FIELD command, 6–19
SHOW SYSTEM SERIAL command,
6–9
Site Management Guide, 6–19
System power-up, 6–4
System serial number, 6–8
System shutdown, 2–4
T
T2019
description, 4–2
installation, 4–8 to 4–9
LEDs, 4–9
Tape drives, 6–20
U
UETP (User Environment Test
Package), 6–21
running the program, 6–21
UPDATE command, 6–8
Upgrades
with H9657-CX, 1–5
V
VAX Diagnostic Supervisor, 6–10
VAX number plate upgrade, 6–23
Verification, 6–1 to 6–23
X
XMI configuration rules, A–2 to
A–3
with H9657-CX upgrade, 4–4
Index–2