Installation guide

Index-4
hard error, 8-12
I/O port, 8-21
machine check, 8-5
soft error, 8-20
PCADR, 1-24
PCCTL, 1-25
PCSCR, 1-16
PCSTS, 1-25
Physical address space, 2-3
Plug-in units
battery, 5-3, 5-5
disk, 5-3, 5-5
XMI, 5-3, 5-5
Power regulator, 5-3, 6-8
on LSB module, 6-7
Power regulators, XMI, 6-10
Processor module, 5-3, 6-6
R
Registers
CPU-specific, 1-6
DWLMA LSB, 1-40
DWLMA XMI, 1-43
Gbus, 1-26
IPRs, 1-11
I/O port, 1-35
KA7AA, 1-2
LSB required, 1-2
MS7AA, 1-27
VAXBI, 2-9
Removable media device, 5-5, 6-3
Repeat command
description, 3-2
syntax, 3-12
S
Self-test LED, 6-7
Self-test map not displayed, 6-7
Set command
description, 3-2
syntax, 3-12
Set EEPROM command
options, 3-6
syntax, 3-12
Set host command
examples, 4-10
options, 3-6
syntax, 3-12
Show command
description, 3-2
syntax, 3-12
Show configuration command
example, 3-18
syntax, 3-12
Show device command
example, 3-19
syntax, 3-12
Show EEPROM command, 3-6
Show network command
example, 3-20
syntax, 3-12
Show power command
abbreviations in output, 3-22
example, 3-21
options, 3-7
syntax, 3-12
SID, 1-15
Soft error parse tree, 8-20
Start command
description, 3-2
syntax, 3-12
Stop command
description, 3-2
syntax, 3-12
STP LED, 6-7
System errors, 8-1
T
TBADR, 1-24
TBSTS, 1-24
Test command
description, 3-3
examples, 4-2
options, 3-7
syntax, 3-12
TF85, 6-3