Installation guide

9-4 Diagnostics and Utilities
9.2 Verification Overview
The following process is used to verify the system after installa-
tion.
Figure 9-2 Verification Procedure
Power Up System.
Self-Test Runs.
1
Enter show
configuration to get
booting mnemonics
2
Check console load
device hardware
3
Use show network
command (for VAX
7000) or show device
command (for DEC
7000) to get target
device name
4
Boot
Operating System
5
Verify System Under
Operating System
6
BXB-0041B-92