Installation guide

Diagnostics and Utilities 9-7
The tests summarized in Table 9-1 run when the system is powered up.
Table 9-1 Power-Up Diagnostics
NOTE: Refer to the Advanced Troubleshooting manual for information on
running console-based diagnostics and utilities using the cdp, set
host, and test commands.
Test Name Test Group
CPU Self-Test
Self-Test
Memory Array Self-Test
Self-Test
XMI Device Adapter Self-Test
Self-Test
Device Peripheral Self-Test
Self-Test
Power Subassembly Self-Test
Self-Test
CPU/Memory Interaction Tests
Additional Power-up Tests
Multiprocessor Tests
Additional Power-up Tests
IOP Tests
Additional Power-up Tests
DWLMA Tests
Additional Power-up Tests
Cache/Memory Exerciser
Console-based Exerciser
Disk Exerciser
1
Console-based Exerciser
Floating-Point Exerciser
Console-based Exerciser
Network Exerciser
1
Console-based Exerciser
1
Run in internal loopback (at I/O adapter) mode only.