Installation guide

Diagnostics and Utilities 9-33
1
Boot the standalone backup from the RRD42 by specifying the console
name of the device as shown in Section 9.8.
2
The OpenVMS Alpha AXP banner appears and the procedure asks for
the date and time.
3
The procedure displays a list of local devices on the system. Enter YES
when all needed devices are available.
4
When booting is completed, it displays an identification message.
5
The OpenVMS Alpha AXP prompt appears. Refer to the OpenVMS Al-
pha Version 1.0 Upgrade and Installation Manual to build the system
disk.
6
Boot standalone backup across the Ethernet by specifying the console
device name of the network device as shown in Section 9.10.
7
The OpenVMS banner appears and the procedure asks for the date
and time.
8
The procedure displays a list of local devices on the system. Enter YES
when all needed devices are available.
9
When booting is completed, it displays an identification message.
10
The OpenVMS prompt appears. Refer to the VMS Upgrade and Instal-
lation Supplement to build the system disk.
For more information:
VMS Upgrade and Installation Supplement:
VAX 7000-600 and VAX 10000-600 Series