Installation guide

Installing the System Cabinet 2-13
1. Assemble a side skirt by attaching a side skirt "upper" to a side skirt
"main" with four self-tapping screws (all assembly components are
contained in the installation kit) as shown in Figure 2-5.
2. Attach the side skirt to the outside base of the system cabinet (see Fig-
ure 2-5). This is done by aligning the two 1/4 turn Phillips fasteners in
the skirt with the matching holes in the cabinet base. Then simply
push the fasteners into the holes.
3. Repeat 1 and 2 for the other side of the system cabinet.