Installation guide

Installing an Expander Cabinet 3-13
1. Locate two side spacers in the installation kit. Side spacers are long
aluminum brackets that are installed vertically between adjoining
cabinets.
2. As shown in Figure 3-6, align the holes in the side spacer tabs with
the threaded inserts on a cabinet. For cosmetic purposes, make sure
the finished side of the spacer faces the outside of the cabinet.
3. Use two screws from the installation kit to attach a spacer to a cabi-
net. Install one spacer in the front of the cabinet and one spacer in the
rear of the cabinet (see Figure 3-6).
4. Repeat 1 through 3 for each pair of adjoining cabinets.