Installation guide

Installing an Expander Cabinet 3-23
1. Assemble a front skirt by inserting a left-hand endcap and a right-
hand endcap into either end of a front center skirt piece (all assembly
components are contained in the installation kit) as shown in Figure
3-11.
2. Attach the front skirt to the outside base of the front of a cabinet by
aligning the two 1/4 turn Phillips fasteners in the skirt assembly with
the matching holes in the cabinet base (see Figure 3-11). Then simply
push the fasteners into the holes.
3. Repeat 1 and 2 for the fronts of all cabinets in the cabinet assembly.