Installation guide

Updating Firmware C-11

Continue? [Y/(N)] y

WARNING: updates may take several minutes to complete for each device.

DO NOT ABORT!

demna0 Updating to 6.06... Reading Device... Verifying 6.06... PASSED.

Function? update demna*

Update all demna?

[Y/(N)] n

Function?

CAUTION: Never abort an update operation; you will corrupt the firm-

ware on the module.

This command specifically requests firmware updates for the CPU and

CIXCD modules. Note the syntax of a device list, separated by

spaces.

LFU requires you to confirm each update, if you named the modules

specifically.

Status message reports update and verification progress.

LFU prompts for each device in turn.

This is a second example. When you specify the * wildcard, LFU tries

to update all modules.

LFU prints the configuration table and prompts before all devices are

updated.

This message appears because, in this example, the firmware on the

DEMNA module is not at a lower revision level than the firmware im-

age on the CD-ROM. You can still request LFU to perform the update

If the module version is equal to the update firmware, you may have

previously tried the update (making the module and CD-ROM firm-

ware images the same revision). However, if the verification process

had reported an error, you can repeat the update. Also, this feature

allows you to update a module with an older revision of firmware.

This is another example, using a wildcard to request LFU to update al

DEMNA adapters in the system. When you use a device mnemonic fol

lowed by a wildcard *, LFU prompts once for all devices of the same

type. A wildcard alone updates all devices.