Installation guide

4-22 Booting
4.5.3 CD-ROM OSF/1 Booting
Example 4-3 CD-ROM OSF/1 Boot
>>> show device
1
polling for units on kzmsa0, slot 2, xmi0...
dka100.1.0.2.0 dka100 RRD42
polling for units on kdm700, slot 6, xmi0...
dub1.1.0.6.0 R2TDYC$DIA1 RF73
dub2.2.0.6.0 R2TDYC$DIA2 RF73
>>> boot dka100.1.0.2.0
2
Booting...
3
Connecting to boot device dka100.1.0.2.0
Created boot device: dka100.1.0.2.0
block 0 of dka100.1.0.2.0 is a valid boot block
reading 16 blocks from dka100.1.0.2.0
bootstrap code read in
base = 1fe000, start = 0
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
jumping to bootstrap at 1fe000
Resetting IO subysystem...
4
[I/O subsystem reset information, memory information
displayed, I/O bus adapters displayed, configured devices
displayed, network configuration information displayed]
The system is ready.
DEC OSF/1 Version 1.2 console
5
DE
C
700
0
This section shows a sample boot of OSF/1 from the RRD4
2
CD drive for DEC 7000 systems. The first step is issuin
g
the show device command to determine the location of th
e
RRD42.