Installation guide

4-36 Booting
4.7.3 CI OSF/1 Booting
Example 4-8 CI OSF/1 Boot
>>> show device
1
polling for units on cixcd0, slot 2, xmi0...
dua20.14.0.2.0 $100$DUA20 RA82
dua31.14.0.2.0 $100$DUA31 RA82
dua80.15.0.2.0 $100$DUA80 RA90
>>> boot dua31.14.0.2.0
2
Booting...
3
Connecting to boot device dua31.14.0.2.0
Connecting to boot device dua31.14.0.2.0
Created boot device: dua31.14.0.2.0
block 0 of dua31.14.0.2.0 is a valid boot block
reading 16 blocks from dua31.14.0.2.0
bootstrap code read in
base = 1fe000, start = 0
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
jumping to bootstrap at 1fe000
Resetting IO subysystem...
4
[I/O subsystem reset information, memory information
displayed, I/O bus adapters displayed, configured devices
displayed, network configuration information displayed]
The system is ready.
DEC OSF/1 Version 1.2 console
5
DE
C
700
0
This section shows a sample boot of OSF/1 for a system i
n
the CI configuration shown in Figure 4-9.