Installation guide

Diagnostics and Utilities 8-33
1
Boot the standalone backup from the RRD42 by specifying the con-
sole name of the device as shown in Section 8.8.
2
The OpenVMS Alpha AXP banner appears and the procedure asks
for the date and time.
3
The procedure displays a list of local devices on the system. Enter
YES when all needed devices are available.
4
When booting is completed, it displays an identification message.
5
The OpenVMS Alpha AXP prompt appears. Refer to the OpenVMS
Alpha Version 1.0 Upgrade and Installation Manual to build the sys
-
tem disk.
6
Boot standalone backup across the Ethernet by specifying the consol
e
device name of the network device as shown in Section 8.10.
7
The OpenVMS banner appears and the procedure asks for the date
and time.
8
The procedure displays a list of local devices on the system. Enter
YES when all needed devices are available.
9
When booting is completed, it displays an identification message.
10
The OpenVMS prompt appears. Refer to the VMS Upgrade and In-
stallation Supplement to build the system disk.