Installation guide

Unpacking and Assembling Cabinets 2-13
1. Open the back door of a system or expander cabinet and locate a tab
on the middle of the back underside of the top cover (see Figure 2-6).
There is a screw in this tab which secures the top cover to the cabinet
body. Remove the screw with a Phillips screwdriver.
2. Lift off the cabinet top cover and place it aside for now.
3. Repeat 1 and 2 for the top covers of all system and expander cabinets.
4. The battery cabinet top cover is not secured with a screw and is re-
moved by simply lifting it off. Remove the top covers of all battery
cabinets in the system and place aside for now.