Installation guide

Unpacking and Assembling Cabinets 2-17
1. Locate two side spacers in the installation kit. Side spacers are long
aluminum brackets that are installed vertically between adjoining
cabinets.
2. As shown in Figure 2-8, align the holes in the side spacer tabs with
the threaded inserts on a cabinet. For cosmetic purposes, make sure
the finished side of the spacer faces the outside of the cabinet.
3. Use two Phillips head screws from the installation kit to attach a
spacer to a cabinet. Install one spacer in the front of the cabinet and
one spacer in the rear of the cabinet (see Figure 2-8).
4. Repeat 1 through 3 for each pair of adjoining cabinets.