Installation guide

Unpacking and Assembling Cabinets 2-23
1. Locate two bottom spacers in the installation kit. Bottom spacers are
small aluminum cylinders that are bolted between the two lower door
hinges in the front and back of adjoining cabinets. In the kit, a bottom
spacer is part of an assembly that includes the spacer, a 40 mm (1.6
in) long bolt, an accompanying nut, and washers.
2. Disassemble a bottom spacer assembly and insert the bolt through
the holes in the lower door hinges in the front of the adjoining cabi-
nets, making sure the bottom spacer and washers are positioned prop-
erly as you insert the bolt (see Figure 2-11).
3. Install nut and tighten.
4. Repeat 1 through 3 for the bottom spacer in the rear of the adjoining
cabinets.
5. Repeat 1 through 4 for each pair of adjoining cabinets.