Installation guide

Unpacking and Assembling Cabinets 2-25
1. Assemble a side skirt by attaching a side skirt "upper" to a side skirt
"main" with four self-tapping screws (all assembly components are
contained in the installation kit) as shown in Figure 2-12.
2. Attach the side skirt to the outside base of the side of the cabinet as-
sembly (see Figure 2-12). This is done by aligning the two 1/4 turn
Phillips fasteners in the skirt with the matching holes in the cabinet
base. Then simply push the fasteners into the holes. Do not try to
screw them in.
3. Repeat 1 and 2 for the other side of the cabinet assembly.