Installation guide

2-42 Unpacking and Assembling Cabinets
2.21 Connect the DSSI Cables
Figure 2-22 DSSI Cable Connection
VAX
1000
0
Connect the DSSI cable between the I/O bulkhead and th
e
disk bricks. Connect the disk brick cables and termina
-
tors. The configuration shown here is only one of man
y
possible configurations; the I/O bulkhead shown is in th
e
bottom rear of the expander cabinet and the disk brick
s
are in the upper front of the expander cabinet. The insta
l-
lation guidelines here, however, are generally applicable.
BXB-0032H-92
Front
Expander
Rear
Expander