Installation guide

Making Console, Ethernet, and FDDI Connections 3-7
The XMI-to-FDDI controller (DEMFA) adapter connects to the FDDI ring
via a BN24B-10 fiber optic cable.
1. Remove the rear panel shield and connect the transceiver cable to the
FDDI port on the I/O bulkhead panel (see Figure 3-4).
2. Connect the other end of the cable to the FDDI network. See the ap-
propriate FDDI manual for details on how this is acomplished.
For more information:
DEC FDDIcontroller 400 Installation/Problem Solv-
ing