Installation Materials and Accessories for Refrigeration and Air Conditioning
Condensate Copper Pumps Tube | 01 36 Refrigeration Quality Copper Tube Copper tube supplied by HRP conforms, where relevant, to EN 12735-1. Soft coiled copper tube is in the annealed (O) condition and straight lengths in half hard (1/2H) or fully hard (H) condition.
02 | Insulation Isoline Class ‘O’ Insulation Isoline is a closed cell, water vapour resistant, thermal insulation for refrigeration, air conditioning and heating pipework. The standard supply colour is matt black and it is suitable for applications from -40°C to 116°C. Isoline is fire resistant to Class 'O', and will not melt or drip even at high temperatures. ALSO AVAILABLE Isoline Colour Supplied in 2 metre lengths. Standard stock colour is black; other colours are available on special order.
Insulation and Ancillaries | 03 Isoline 15m Class ‘O’ Isoline Paint Isoline pipe insulation supplied in 15 metre lengths. Inside surface is talced for easy application to pipe. When applied at temperatures between 5°C and 30°C, this paint will dry to give a high quality protective film, with an attractive finish. It also has good weathering characteristics and will protect the insulation from UV radiation and ozone. Colour - matt black.
04 | Pipe Supports Insulclamp The professional pipe support system insulates against heat loss and also reduces vibration. The thermoplastic inserts are colour passivated and will withstand temperatures between -30°C and 125°C. Insulclamps are supplied with a zinc plated finish and are available in 14 individual sizes. These clips are supplied individually.
Pipe Supports | 05 Squeezy Fit Clamps By simply squeezing the tips together, the spring steel rod hanger can be fitted or adjusted in seconds. The spring steel hanger grips the rod tightly and the black zinc coating offers corrosion resistance.
06 | Pipe Supports All Round Band The Patentband can be used as clips, clamps, brackets or ties. With screws, bolts or rivets, it can be fixed to or suspended from most surfaces. It is available with or without plastic covering in galvanised steel or copper. The band is easily formed to adapt to any shape with no undue loss of strength or cracking of the plastic coating. Band sizes are 10m x 12mm wide.
Copper Fittings | 07 Straight Socket Equal Female/Female Tube O.D.(") Code Tube O.D.(") Code 1/4 130001 1-3/8 130095 3/8 130028 1-5/8 130109 1/2 130036 2-1/8 130117 5/8 130044 2-5/8 130125 3/4 130052 3-1/8 130133 7/8 130079 3-5/8 130141 1-1/8 130087 4-1/8 130168 Reducing Sockets Male/Female Tube O.D.(") Code Tube O.D.
08 35 | Copper Condensate Fittings Pumps 90° Copper L/R Elbows Female/Female 90° Copper S/R Elbows Male/Female Tube O.D.(") Code Tube O.D.(") Code 1/4 131725 1/2 134031 3/8 131733 5/8 134058 1/2 131741 7/8 134066 5/8 131768 1-1/8 134074 3/4 131776 1-3/8 134082 7/8 131784 1-5/8 134090 1-1/8 131792 2-1/8 134104 1-3/8 131806 2-5/8 134112 1-5/8 131814 2-1/8 131822 2-5/8 131849 3-1/8 131857 3-5/8 131865 4-1/8 131873 90° Copper L/R Elbows Male/Female Tube O.D.
Copper Fittings and Vibration Condensate Eliminators Pumps | 09 36 Copper Tees Equal Female/Female/Female Tube O.D.(") 5/16 1/4 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 3-5/8 4-1/8 Copper End Caps Code 132521 132519 132527 132535 132543 132551 132578 132586 132594 132608 132616 132624 132632 132640 132659 Tube O.D.
10 | Brass Fittings NFS Flare Nuts - Short Part No Flare Size Material A/F Size Code NFS-4 1/4" 3/4" 100234 NFS-6 3/8" 7/8" 100269 NFS-8 1/2" 1" 100277 NFS-10 5/8" 1-1/8" 100285 NFS-12 3/4" 1-3/8" 100293 NFS-14 7/8" 1-1/2" 100188 U1 - Male Flare To Male Pipe Unions NPT Part No Flare Size x NPT Material A/F Size Code U1-4A 1/4" x 1/8" 7/16" 101427 U1-4B 1/4" x 1/4" 9/16" 101435 Flare to Solder Connectors Supplied without copper gaskets.
Brass Fittings | 11 U2 - Double End Male Flare Unions Part No Flare Size Material A/F Size Code U2-3 3/16" 7/16" 100811 U2-4 1/4" 7/16" 100838 U2-5 5/16" 1/2" 100846 U2-6 3/8" 5/8" 100854 U2-8 1/2" 3/4" 100862 U2-10 5/8" 7/8" 100889 U2-12 3/4" 1-1/16" 100897 U2-14 7/8" 1-3/16" 100919 In addition to the sample range shown, a full and comprehensive range of brass fittings and Schrader access valves is available from all HRP Service Centres.
12 | Driers WEU Liquid Line Driers Following a period of extensive research work and the introduction of new refrigerants, the WEU range of liquid line driers has been introduced. The WEU series has a desiccant mix of 100% MS594 molecular sieve for even greater moisture retention. The new higher pressure refrigerants, such as R410A, demand a high pressure rating for the line components which has resulted in a thicker new WEU series. The entire range has a shell rating of 45 bar.
Driers / Sightglasses | 13 BFK Bi-Directional Filter Driers For liquid where the flow may be reversed. All models are fully compatible for use with CFCs, HCFCs, and HFCs, along with their associated lubricants when used within their operating pressure ranges. Model No Conn Size * R22 flow cap kW Code Model No Conn Size * R22 flow cap kW Code BFK 083 3/8" fl 22.5 210366 BFK 083S 3/8" sw 25.3 210374 BFK 084 1/2" fl 32.0 210382 BFK 084S 1/2" sw 33.4 210390 BFK 163 3/8" fl 22.
14 | Unistrut and Cable Tray Cable Tray The tray is medium duty (code 3), manufactured from cold rolled mild steel and pre-galvanised. There is a standard pattern of holes, featuring alternating rows or horizontal and vertical slots, to provide improved flexibility in design and increased ease of installation. Part No Gauge Size (mm) (mm) Length (mm) Description Box Qty Code TUMLT 100/10PG 0.8 100 3000 Cable tray - medium duty 1 292636 TUMLT 150/10PG 0.
Unistrut and Accessories | 15 Channel Nuts Zinc electroplated fittings, designed for compatibility with all Unistrut channel.
35 | Unistrut 16 Condensate andPumps Accessories Bolts, Nuts and Washers A selection of stainless steel, zinc plated and hot-dip galvanised accessories.
Unistrut Accessories and Nylon Condensate Threaded Pumps Rod | 17 36 Channel Brackets and Fixings Stand-Off Bracket Part No Description Code UKCTSO 100PG Stand-Off Bracket 100MM 292864 UKCTSO 150PG Stand-Off Bracket 150MM 292865 UKCTSO 225PG Stand-Off Bracket 225MM 292866 UKCTSO 300PG Stand-Off Bracket 300MM 292867 UKCTSO 450PG Stand-Off Bracket 450MM 292868 UKMSF 504 4 Hole Plate 292869 UKMSF 507 4 Hole T Bracket 292870 UKMSF 506 3 Hole L Bracket 292871 UKMBP 305 Double Fix Ba
18 35 | Condensing Condensate Pumps Unit Mounting Brackets Condensing Unit Mounting Brackets - Type 1 Top, central or low mounting wall brackets, this choice of three positions enables the siting of equipment in difficult areas. Finished in a high quality ivory powder coat paint. Designed for easy installation, boxed and complete with necessary fittings to mount unit as required (excludes Rawl bolts).
Security Guards forCondensate CondensingPumps Units | 19 36 Security Guards for Condensing Units (BBJ type) A range of unobtrusive condensing unit housings which helps prevent damage and vandalism.
20 35 | Housings Condensate Pumps Steel Flat Packed - Hermetic Condensing Unit Housing This range offers enclosures for all the hermetic units up to 6hp. We have specified the units we offer, but other manufactures’ units will also be acceptable as the housings include a base frame. Fast access is via an easily removable louvre panel and the design offers additional space around the unit to accommodate ancillary equipment such as oil separator, isolator, suction accumulator etc.
Condensate Housings Pumps | 21 36 Virgo GRP- Hermetic Condensing Unit Housing Virgo glass reinforced white plastic housings are designed to suit a wide range of refrigeration condensing units, requiring waterproof, ventilated protective housings which are easily installed, give good access for inspection purposes and are easily accessible for servicing. • Optional rear louvre(s) for condenser inlet aperture(s); models 5,6 and 7 are supplied as a pair.
22 35 | Unit Condensate Mounting Pumps Blocks and Anti-Vibration Pads Condensing Unit Mounting Blocks Versatile mounting blocks manufactured in rigid polyvinyl. Supplied complete with necessary bolts, nuts and washers. Part No Size Code SB450 BBJ Blocks 450mm (250kg max. point load) 600114 SB1000 BBJ Blocks 1000mm (250kg max. point load) 600105 9898-036-95 Sauermann 450mm (250kg max. point load) 605654 9898-035-95 Sauermann 1000mm (250kg max.
BBJ Big Foot Condensate Support Systems Pumps | 23 36 Big Foot and Multi Foot Support Systems • Universal framework for mounting on a flat roof. • Suitable for small external condensing or ventilation unit. • Modular frame allows width and length adjustment to suit different size units. • Feet can be individually removed to facilitate re-roofing and roof maintenance. It is the contractor's responsibility to ensure the surface will take the total weight of the framework plus units mounted on it.
24 | Sauermann Trunking Trunking, Connectors and Accessories Features and Benefits: • Quick and easy fitting system • Extremely compact pipe covering • Colour white (RAL 9010) • Resistant to low and high temperatures (-20°C to +60°C) • RoHS compliant • Fire and shock proof PVC • UV protected Trunking (2m length) Upper Connectors Part No Dimensions (mm) HRP Code Part No Dimensions (mm) HRP Code 980400108 70 x 55 604680 980410208 70 x 55 604716 980200108 90 x 65 604682 980210208 90 x
Inoac Trunking | 25 Inoac Plastic Trunking Easy to use and aesthetically pleasing ivory coloured plastic, for professional installations of pipework and wiring.
26 35 | Cassette Condensate Space Pumps Collars Universal and Mitsubishi Heavy Industries Space Collars • A range of unobtrusive unit collars that allows units to be installed where the ceiling void height is insufficient • Fits between the fascia of the cassette and the ceiling • Compatible with most makes of cassette including Toshiba, Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries, Fujitsu General and Marstair • Manufactured from glass fibre reinforced plastic • MHI - colour light grey/white
Condensate Pumps | 27 Peristaltic Type (Non-Tank) Peristaltic pumps are rotary design, this means they are quiet in operation, very reliable and can run dry without fear of damage or loud noise. They also have the additional benefit of being self-priming. The maximum flow rates indicated are values measured whilst pumping against zero/negligible resistances. Make Max.Head Max.Lift (m) (m) Model Aspen Universal Sauermann PE5100 Max.Flow (l/hr) Conn.
35 28 | Condensate Pumps Split/Remote Sensor Type This type of pump is designed for use in air conditioners and other cooling appliances, where internal space permits. The dimensions shown relate to the main control unit rather than the sensor head itself. Most units are suitable for remote mounting such as in a ceiling void, the separation is restricted by the pump suction lift capability. Make All units come complete with sensor, except the two Hydron models where a choice can be made (Pump Accessories).
Condensate Drain Condensate and Hose Pumps Clips || 36 29 Condensate Tubing and Accessories Part No Size Description Code RTV-1-4 1/4" Reinforced PVC hose 30m clear 602282 RTV-1-4 1/4" Reinforced PVC hose 30m black 602284 RTV-3/8 3/8" Reinforced PVC hose 30m clear 602286 RTV-3/8 3/8" Reinforced PVC hose 30m black 602288 RTV-1/2 1/2" Reinforced PVC hose 30m clear 602290 RTV-1/2 1/2" Reinforced PVC hose 30m black 602292 7-14 1/4" Clear vinyl tube 30m 602294 7-38 3/8" Clear v
30 Components and Terminals 35 | Electrical Condensate Pumps ‘Hi-Tuff’ Type Cable Black cable suitable as an alternative to SWA where allowed. For use with standard stuffing glands. Description Gland Size Cleat Size Reel Size Size 3 core 1.5mm 20 5 100 metres 190695 4 core 1.5mm 20 5 100 metres 190696 5 core 1.5mm 20 6 100 metres 190697 3 core 2.5mm 20 5 100 metres 190698 4 core 2.
Electrical Components Condensate and Accessories Pumps || 36 31 Black Flexible Conduit Cable Cleats Manufactured from polypropylene, rated to IP66. This 20mm conduit is supplied in a 10m coil with 10 off straight adaptors/locknuts.
32 Components and Terminals 35 | Electrical Condensate Pumps Pre Insulated Terminals Red All Terminals are vinyl insulated and supplied in packs of 100. Ring Terminals Part No Size Code 37 RER 3.7mm 119601 43 RER 4.3mm 119628 53 RER 5.3mm 119636 65 RER 6.5mm 119644 Female Push-On Terminals Part No Size Code 63 RFP 6.3mm 119660 Male Push-On Terminals Part No Size Code 63 RMP 6.3mm 119652 Yellow All Terminals are vinyl insulated and supplied in packs of 100.
Test Instruments - MultimetersCondensate and Clamp Meters Pumps | 33 36 Capacitor Tester YF-602 Multimeter This indicates open and shorted capacitors, also good, bad and leaking ones via an audible signal. Also provides approximate indication of capacitance.
34 35 | Recovery Condensate andPumps Handling Equipment CR400ECH (Inc. 180cm Ball Valve Hoses) Automatically recovers both liquid and vapour refrigerant without the need for manual adjustments. The unit is fitted with a 1/6hp oil-filled hermetic compressor and has the advantage of a self-purging system that clears the unit of residual refrigerant. Code Refrigerants All CFCs, HCFCs and HFCs - including R410A Dimensions 200mm x 370mm x 305mm Weight 12.
Recovery and Handling Condensate Equipment Pumps || 36 35 EcoBuddy and Eco Warrior This lightweight unit offers a highly efficient and easy to use solution for reclaiming refrigerant gases, which has not only become an environmental necessity but a legal requirement. Constructed in a rugged moulded case, it includes oil-less compressor, purge facility, shoulder strap, plug socket (max. 800W), tool tray and lamp. Code Refrigerants All CFCs, HCFCs and HFCs Dimensions 430mm x 260mm x 305mm Weight 12.
36 35 | Weighing Condensate and Pumps Charging Scales Slimline Electronic Charging/Recovery Scale TIF9050I Programmable Charging/ Recovery Meter This design is only 50mm thick and the entire unit weighs less than 2kg. The loadcell will handle a wide range of cylinders, providing a simple means of weighing refrigerant into a system or cylinder. Supplied with 9V battery and ABS carry case.
Condensate Service Equipment Pumps | 36 37 Autoclimate Vacuum Pumps - 2 Stage A range of high quality CE approved vacuum pumps from 1.3 to 6.5cfm. Model No Hose Connection (SAE) Position Capacity (cfm; Voltage (V/Hz) 50Hz) 2509-017 1/4 and 3/8 H and V 1.3 2509-019 1/4 and 3/8 H and V 4.0 2509-020 1/4 and 3/8 H and V 6.5 Weight (kg) Code 220/50 9.60 167854 220/50 12.50 167856 220/50 20.
38 35 | Manifolds Condensate and Pumps Hoses Refrigeration Service Manifolds and Gauges • Manifolds are supplied pre-assembled with gauges fitted to the valve bar • Valve bars are available as 2 valve or 4 valve models • Gauges are pre-printed with a range of refrigerant saturation temperatures • All valve bars are aluminium (except Elanmax 2506-031 which is brass) • All 2 valve and 4 valve bars are fitted with a sight glass (except R410A models) • 1/4" SAE connections except R410A models which have 5/16" S
Condensate 36 Manifolds andPumps Hoses | 39 Digital Manifolds REFCO 2-Way Digital Manifold Robust and durable, these digital manifolds are more than tough enough to deal with day-to-day use. The digital display eliminates parrallax error and needle vibration. • 50 refrigerants, incl.
40 35 | Manifold Condensate Accessories Pumps Premium Hoses 1/4" SAE 5/16" SAE (R410A) 3/8" SAE (Vacuum) Hose Colour Size (cm) Code Hose Colour Size (cm) Code Hose Colour Size (cm) Code • • • • • • 90 163227 150 163240 - 163233 90 - 180 - 90 163229 150 163242 150 - 180 163235 90 - 180 - 90 163231 150 163246 150 - 180 163238 90 - • • • • • • 150 180 • • • • • • 180 - Premium Hoses with Ball Valves 1/4" SAE 3/8" SAE (Vacuum) 5/16" SAE (R410A) Hose Colour
Tube Benders | 41 Imperial Triple Headed Benders Innovative multi-tube size design, with calibrated markings. Part No 367-FH 368-FH Tube Sizes 1/8",3/16",1/4" 1/4",5/16",3/8" Code 162760 162698 Robinair Four Headed Bender Bends four sizes of soft tubing. Calibration allows duplication of any angle. Construction combines strength and lightweight durability.
35 | Tube Condensate Pumps Working Tools 42 Benders/Tube Cross Bow Benders CPS Compression Flaring Tools These benders are designed for bending soft copper tube. The HB-451 is the ITE hydraulic pump version,whereas the 23022 is a Rothenberger ratchet version. Part No HB-451 23022 Description 1/4",5/16",3/8",1/2" 5/8",3/4,"7/8" 3/8" to 7/8" This flaring block is manufactured from hardened steel with hard chrome finish flaring cone.
Tube Condensate WorkingPumps Tools | 43 36 ITE FTE-800 IMTRW Flaring Tool CPS Tube Expander and Spares Containing inch bar 1/8,3/16, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 Metric bar 6, 8, 10, 12, 14, 15, 16 and 18mm, yoke. TC-274 tube cutter1/8 to1 1/8 (4 to 28mm) RIO-208 reamer1/8 to 1 5/8 (3 to 41mm), 127-RW ratchet wrench Part No FTE-800 IMTRW Tube Sizes Flaring Tool Kit Code 162890 Spring loaded push rod follows smoothly eccentric end of lever, does not stick.
44 35 | Tube Condensate Working Pumps Tools Imperial Tube Cutter Spares Imperial TC-1050 Tube Cutter New super compact design, handle and feed mechanism.
Service Equipment - Tube Condensate WorkingPumps Tools | 45 36 Mastercool Hydraulic Swaging Kits Rothenberger Automatic Tube Cutter Spring loaded action for instant change in tube sizes. There are two kits available; a seven-head kit and a ten-head kit, both include the robust black carrying case, inner-type tube reamer, 6000psi ‘Hydra-Swage’ expander tool and relevant imperial sized expander heads.
46 35 | Service Condensate Equipment Pumps- Tube Working Tools Imperial A-10971 Capillary Gauge CPS Tube Cutter Spares Precision engineered for gauging ID or OD of capillary tubing. Part No Tube Sizes Code TCX7C TC127/174 wheel 163347 TCX7S TC127/174 screw 163348 TXC4C TC274/312 wheel 163349 TXC4S TC274/312 screw 163350 TXC4R TC274/312 blade 163351 TCX4RS TC274/312 blade screw 163352 Part No A-10971 Tube Sizes ID sizes 0.026" to 0.09" OD sizes 0.
Service Equipment Condensate - Handtools Pumps | 47 36 Imperial 127-C Ratchet Robinair 10983 Ratchet Compressor valve steel forged wrench with sizes to cover almost every application. Compressor valve steel forged wrench with sizes to cover almost every application. Part No 127-C Drive Sizes 1/4" ratchet, 3/16" and 5/16" sq.drive 9/16" hex.drive Code 163392 TWSWS Drive Sizes 3/8" and 5/16"sq.ratchet 10983 1/4" and 3/16" sq.
48 35 || Service Condensate Equipment Pumps- Handtools Imperial 105-FF Pinch Off Tool ITE MC-3900 Valve Core Removal Tool Temporarily closes soft copper tube so no refrigerant can pass the sealed port. Enables the line to be disconnected whilst making repairs. Also reopens tubing, rounding it back to shape.
Service Equipment Condensate - Handtools Pumps || 36 49 CPS TLVC4 Thread Chaser and Valve Core Tool Rothenberger Junior Hacksaw Part No Drive Sizes Code Part No Code 8.0035M Junior hacksaw 168025 TLVC4 163890 8.
35 50 || Condensate Service Equipment Pumps - Handtools Disposible Vinyl Gloves Solenoid Valve Operating Magnets A tool for manually operating solenoid valves during commissioning or service work where power is unavailable. Suitable for use with most makes of valve with stem diameter 15 or 18mm. Premium disposible vinyl gloves. Dispenser box contains 100 of the large size.
Condensate Service Equipment Pumps || 36 51 Gallo Gun A lightweight portable tool that’s designed to blow out condensate drain lines instantly. Simply insert a CO2 cartridge into the Gallo Gun and with a press of the trigger, 800psi of oil-free, food grade CO2 clears the line of any blockage or restriction.
52 35 || Leak Condensate Detection Pumps Equipment F-Gas Rules • Systems containing more than 3kg (6kg for hermetic systems) must be leak checked every 12 months • Systems containing more than 30kg must be leak checked every 6 months • Systems containing more than 300kg must be leak checked every 3 months and be fitted with a fixed detection system which must be checked every 12 months • The accuracy of the leak detection system in all cases must be better than 5 grams per year CPS Suitable for detec
Leak Detection Condensate Equipment Pumps | 53 36 F-Gas Compliant Spectroline Fluorescent Leak Detection • Approved by major compressor manufacturers and OEMs • Effective for all refrigerants and lubricants • For all sizes of refrigeration and A/C equipment • Simple procedure slashes diagnostic time • Used in millions of systems worldwide Complete Starter Kits Model No Optimax Pro Optimax JR Description Complete starter kit with carrying/storage case, UV LED cordless rechargable inspectio
54 35 | Leak Condensate Detection Pumps Equipment . F-Gas Compliant HRP offers a range of Bubble-Up and Aerosol leak detectors, which are designed to be spayed onto the system components. Leaks are identified by foaming of the detector solution. Advanced Engineering Bubble-up Leak Detector Liquid leak detection fluid for refrigerant, air or gas systems.
Condensate Brazing Equipment Pumps | 36 55 Rothenberger Super Fire 2 Brazing Torch Concentrated high heat, anti-flare, adjustable flame with powerful turbine flame pattern. Equipped with instant piezo ignition, the Super Fire 2 is fast & effective for all brazing applications and can be operated with either the disposable propane or Mapp gas cylinders. Part No Bottle Size (ml) Code 3.5644X Super Fire 2 torch only 166766 3.2083 High pressure propane reg. 166529 3.2201 2.
56 35 | Brazing Condensate Equipment Pumps Scorpion Brazing Set This consists of a Microflame 6000 torch and a 5000 series oxygen/propane pack. The 6000 torch is ideal for precision brazing and the oxygen can be used with butane, propane or natural gas. The torch may be connected to standard industrial gas cylinders and regulators as well as the portable gas pack supplied. The 2.
Condensate BrazingPumps Alloys | 36 57 Phosphorus Brazing Alloys - Self Fluxing Suitable for flux-free brazing of copper and high quality copper alloys in air, or in a protective atmosphere furnace. A flux will normally be required for parent materials with copper contents of less than 90%. Description AG % Content Dimensions (mm) Rod dia Rod Length Pack Qty Code Eutectic RB 5246 0.0 2.5 500 1kg 171914 Eutectic 180 <0.5 2.4 500 1kg 171905 Rothenberger Rolot S2 0.
58 35 | Refrigerants Condensate Pumps In recent years, there have been many changes to the legislation governing the availability of refrigerants and more major changes will be implemented in the near future. The most significant is the banning of R22 (Virgin HCFC) from 1st January 2010. New Refrigerants HRP leads the way in the supply of refrigerants to the UK industry, in partnership with BOC Refrigerants.
Refrigeration Systems andCondensate Capital Equipment Pumps | 59 36 HRP is the leading UK wholesale supplier of Coolers, Condensing Units, Compressor Sets, Cellar Coolers and Controls, from a wide range of top brand manufacturers.
60 35 | Air Condensate Conditioning Pumps and Heat Pump Systems HRP and 3D Air Sales Ltd are the UK Distributors of the extensive range of split systems, Multi Systems, and VRF Systems manufactured by Mitsubishi Heavy Industries. These top brand high performance air conditioning/heat pump systems provide installers with the reassurance of quality and reliability, plus the simplicity of easy installation and commissioning.
Head Office HRP Group Technical Centre 3D Air Sales Ltd Rougham Industrial Estate Rougham, Bury St Edmunds Suffolk IP30 9XA 159 Edinburgh Avenue Slough Trading Estate Slough SL1 4UE 159 Edinburgh Avenue Slough Trading Estate Slough SL1 4UE Tel: 01359 270888 Fax: 01359 271132 headoffice@hrpltd.co.uk www.hrponline.co.uk Tel: 01753 495700 Fax: 01753 495701 training@hrponline.co.uk www.hrponline.co.uk/tc/ Tel: 01753 495720 Fax: 01753 495721 sales@3dair.co.uk www.3dair.co.
