User Guide Vax Careline: AU: 1300 361 505 NZ: 0800 800 900 Bagless Cylinder Get Cleaning... What’s your Vax’s model number? (Located on the top flap of the packaging) V C A P H 1 5 0 0 What’s your serial number? (Located on the base of the machine) Note these down in case you need them in future. Please keep instructions for further use. vax.com.
Vax Service line: AU: 1300 361 505 NZ: 0800 800 900 vax
505 900 Machine Overview 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Hose connector Dirt container Cyclone separator and shroud Carry handle Dirt container release button Cord rewind button (hidden) Floor head parking slot On/off button Post-motor filter cover Primary separator HEPA H12 antibacterial post-motor filter Pre-motor filter Motorised powerhead Hardfloor tool Telescopic extension tube Dusting brush Crevice tool Flexible hose and handle Upholstery tool Mini turbo tool 1 2 3 4 5 7 6
General Safety Information FOR HOUSE HOLD USE ONLY. When using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. Do not handle the plug or vacuum cleaner with wet hands. Do not use outdoors or on wet surfaces. 2. Turn off the vacuum cleaner controls before disconnecting or connecting from the electrical socket. 3.
05 900 Operation Keep your Vax like new IMPORTANT: The condition of the filters affects the performance of your machine. Please check and wash filters periodically (depending on the level of use). For full cleaning instructions, see pages 5-8. IMPORTANT: Do not use the vacuum cleaner without all of the filters in place. Assembling your vacuum cleaner NOTE: The crevice tool, upholstery tool and dusting brush can all be attached to the telescopic tube or hose handle.
Maintenance (Keep your Vax as good as new) Packing away and storage NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where the floor head and tubes can be attached for storage and carrying. Emptying and cleaning the dirt container Press dirt container release button and lift. 5 Press the dust release lever to empty dirt.
505 900 Maintenance (Keep your Vax as good as new) Cleaning the pre-motor filter IMPORTANT: Water temperature should be a maximum of 40º C when washing pre-motor filter. WARNING: Allow pre-motor filter to completely dry before replacing in vacuum cleaner. tap Cleaning the HEPA post-motor filter WARNING: Do not wash the post-motor filter. vax.com.
Maintenance (Keep your Vax as good as new) Advanced cleaning – primary separator tap 24hr Advanced cleaning – cyclone separator Wipe to clean. Parts must be completely dry before using your machine.
505 900 Maintenance (Keep your Vax as good as new) Clearing blockages WARNING: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Disconnect the hose from the vacuum cleaner and remove any blockages found then reconnect the hose securely. Hose blockages Accessory blockages The flexible hose may be disconnected from the vacuum cleaner. Carefully remove any blockages found and reconnect the hose securely.
FAQ’s WARNING: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Problem Solution There is an accessory missing Check the ‘Machine Overview’ page in this guide to make sure the part is definitely included in your unit If it is missing, we’re here to help.
505 900 Other Information Vax Service & Help Vax Careline: Australia New Zealand 1300 361 505 0800 800 900 Monday-Friday 8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. For the nearest Service Agent, please call the Vax Customer Careline or visit vax.com.
Distributed by Techtronic Industries Pty. Ltd. Level 1, 660 Doncaster Road, Doncaster, Australia 3108. www.vax.com.
