Specifications

OpenVMS Operating System for Alpha and VAX (Versions 7.1, 7.1–1H1, 7.1–1H2, and 7.1–2) SPD 41.87.06
DE436 A high-performance network adapter that
connects QUAD PCI systems to both the
Ethernet and IEEE 802.3 local area networks.
DE450 A network adapter that connects
PCI systems to both the Ethernet and IEEE
802.3 local area networks.
DE500-AA A 10 or 100 Mb performance network adapter
that connects PCI systems to both the Eth-
ernet and IEEE 802.3 local area networks.
(Alpha only—Version 6.2-1H3 minimum sup-
port.)
DE500-BA A 10 or 100 Mb performance network adapter
that connects PCI systems to both the Eth-
ernet and IEEE 802.3 local area networks.
(Alpha only—Version 6.2-1H3 minimum sup-
port.)
DE504-BA A quad channel 10 or 100 Mb performance
network adapter that connects PCI systems
to both the Ethernet and IEEE 802.3 local
area networks. (Alpha only—Version 7.1-1H1
minimum support.)
DE500-FA A 10 or 100 Mb performance network adapter
that connects PCI systems to both the Eth-
ernet and IEEE 802.3 local area networks.
(Alpha only—Version 7.1-1H1 minimum sup-
port.)
DE500-XA A 10 or 100 Mb performance network adapter
that connects PCI systems to both the Eth-
ernet and IEEE 802.3 local area networks.
(Alpha only—Version 6.2-1H2 minimum sup-
port.)
DEGPA-SA A 100 or 1000 Mb performance network
adapter that connects PCI systems to both the
Ethernet and IEEE 802.2 local area networks.
(Alpha only—Version 7.1–2 minimum support.)
DW300 A network adapter that connects the EISA bus
to a Token Ring local area network.
PBXNP-DA Racore network adapter that connects PCI
systems to a Token Ring local area network.
Version 6.2-1H3 minimum support.
PBXNP-AA TC4048 network adapter that connects PCI
systems to a Token Ring local area network.
Version 6.2-1H3 minimum support.
DETRA A network adapter that connects the TUR-
BOchannel bus to a Token Ring local area
network.
PB2CA-AA A network adapter that connects
EISA systems to both the Ethernet and IEEE
802.3 local area networks.
LAN Options (VAX Only)
DEUNA Ethernet to UNIBUS controller.
DELUA Ethernet to UNIBUS controller. The minimum
revision level required is F1.
DEBNA Ethernet to VAXBI communication controller.
DEBNI Ethernet to VAXBI communication controller.
DESVA Ethernet controller interface.
DEQNA Ethernet controller to Q-bus. The minimum
revision level required is K3. Supported for
application use only. Not supported beyond
Version 5.4-3.
DELQA Ethernet controller to Q-bus. This is the re-
placement for DEQNA. The minimum revision
level required is C3.
DESQA Ethernet controller to Q-bus for S-BOX config-
urations.
DEFQA FDDI to Q-bus controller
KFE52 DSSI/Ethernet adapter for the VAXft 3000.
Minimum of two adapters per system providing
redundant connection to the Ethernet and the
DSSI buses.
CI Options (Alpha Only)
CIPCA Native CI adapter for PCI AlphaServer
systems with one CI port. (Alpha only—
Version 6.2-1H2 minimum support)
CIXCD-AC Native CI adapter for Alpha XMI systems.
(Minimum microcode version REV 1.0 is
required.)
CI Options (VAX Only)
VAXcluster software can support multiple CI adapters
per system. Refer to the VAXcluster Software Product
Description (SPD 29.78.xx) for the supported configura-
tions.
CIBCI CI adapter for VAXBI systems. (Minimum
microcode version REV 8.7 is required.)
CIBCA-AA Native CI adapter for VAXBI systems. (Mini-
mum microcode version REV 7.5 is required.)
CIBCA-BA Native CI adapter for VAXBI systems. (Mini-
mum microcode version REV 5.2 is required.)
CIXCD-AA Native CI adapter for VAX 9xxx XMI systems.
(Minimum microcode version REV 1.0 is
required.)
CIXCD-AB Native CI adapter for VAX 6xxx XMI systems.
(Minimum microcode version REV 1.0 is
required.)
Miscellaneous
PC4XD-AA Parallel/serial port adapter.
PMTCE TURBOchannel extender.
44