User guide

DUP driver utility, C–2, C–6
entering, C–7
exiting, C–10
E
Earth drain wire
MMJ ports, 4–13
EIA-232
asynchronous, 4–2, 4–21
synchronous, 4–1, 4–23
to DEC423 adapter (H8575-A), 4–15,
4–17
V.24, 4–1, 4–21, 4–23
EIA-232 port
See Asynchronous modem control port
EIA-232/V.24, 4–2
EIA-422/V.11, 4–1
EIA-423/V.10, 4–1
Eject button
location on RRD42, 2–28
location on RX23, 2–26
location on RX26, 2–26
location on TZK10/TZK11, 2–12
use with RRD42, 2–28
use with RX23, 2–26
use with RX26, 2–26
use with TZK10/TZK11, 2–12
Emergency eject hole
location on RRD42, 2–28
location on RRD43, 2–35
use with RRD42, 2–28
use with RRD43, 2–35
Ethernet
completing the installation, 3–11
connecting standard Ethernet, 3–8
connecting Thinwire Ethernet, 3–4
connecting to DECconnect faceplate, 3–6
disconnecting T-connector, 3–12
disconnecting transceiver cable, 3–14
icon, 1–7
installation failure, 3–11
network select switch, 3–2
network select switch location, 1–3
network select switch use, 1–3
Ethernet (cont’d)
node name, 3–11
removing system from Standard, 3–14
removing system from ThinWire, 3–12
selecting type, 3–2
SHOW ETHERNET command, 3–11
standard Ethernet port location, 1–3
standard Ethernet port use, 1–3
TEST 9 failure, 3–10
TEST 9 success, 3–10
testing installation, 3–10
ThinWire Ethernet port location, 1–3
ThinWire Ethernet port use, 1–3
Ethernet address, 3–11
Expansion boxes
checking connections, 4–12
connecting, 4–4 to 4–13
connecting cables, 4–9
connection guidelines, 4–6
preparing system unit for, 4–8
Expansion ports
location and use
Model 105A, 1–5
Model 106A, 1–4
Extension cables
BC16C-nn, 4–2
BC16E-nn, 4–2
BC22F-nn, 4–1, 4–2
BC55D-nn, 4–1
null-modem, 4–2, 4–15
External options, 4–4
F
Faceplate
connecting to DECconnect, 3–6
Factory Installed Software
See FIS
FIS, 2–42
FORCEUNI, C–3
Index–4