User guide

2.3.3 Inserting a QIC Tape into the TZK10/TZK11
To insert a QIC tape into the TZK10/TZK11, follow these steps:
1. Press the eject button to open the door on the front of the TZK10/TZK11
(see Figure 2–6). The door partially opens.
2. Open the door fully.
3. Insert the QIC tape into the TZK10/TZK11. Figure 2–6 shows the correct
orientation of the tape as you insert it. Slide the tape in until you feel
resistance.
4. Close the door.
When you insert the tape correctly, the LED turns green, then flashes green
while the TZK10/TZK11 makes several whirring sounds. Finally, the sounds
stop and the LED stays green. You can now send operating system commands
to the TZK10/TZK11 QIC tape drive.
If the LED turns amber, see the VAX 4000 Model 105A/106A Troubleshooting
and Diagnostics Information manual.
2–14 Internal System Devices