User guide

2.3.4 Removing a QIC Tape from the TZK10/TZK11
To remove a QIC tape from the TZK10/TZK11, follow these steps:
1. Dismount the QIC tape by entering the commands from the operating
system.
Before you go to step 2, wait until the tape stops moving (the TZK10/TZK11
stops whirring) and the LED stops flashing green and stays green.
2. Press the eject button (see Figure 2–7).
3. Open the door fully and remove the tape.
4. Close the door.
2–16 Internal System Devices