User guide

vax.com.au 8
FAQ’s
Problem Cause Solution
Vacuum cleaner won’t run
Not properly plugged into electrical outlet. Plug in securely.
Blown fuse/tripped breaker Reset circuit breaker or replace fuse
No electricity in the electrical outlet. Check fuse or breaker.
On/off switch not turned on. Push on/off switch to ‘on’.
Motor thermostat has tripped.
Switch off and unplug the vacuum cleaner.
Leave for one (1) hour before switching the
vacuum cleaner back on.
Blown fuse/tripped breaker. Reset circuit breaker or replace fuse.
Cleaner won’t pick up/loss
of suction
Dirt container not installed properly. Review dirt container replacement.
Dirt container full or blocked. Empty dirt container.
Clogged filters. Remove, clean and replace filters.
Accessories won’t pick up
Accessories are not attached correctly. Refer to page 4.
Hose is not installed correctly. Refer to page 4.
Dust escaping from the
vacuum cleaner
Dirt container full. Empty dirt container.
Dirt container not installed correctly. Review dirt container replacement.
Hose is not installed correctly. Review installation.
Filter not installed completely. Remove, clean and replace filters.
WARNING: To reduce the risk of personal injury, unplug the vacuum cleaner before performing
maintenance/troubleshooting checks.