Installation manual

Upgrading the OpenVMS VAX Operating System
7.3 Upgrade Phase 1
Also note that, for TK50 tape cartridges, it is quicker to install OpenVMS VAX
software during the upgrade than to add software after the upgrade with a
tailoring utility. For information about using VMSTAILOR, see Chapter 10. To
select the options you want to install, follow the instructions displayed by the
procedure.
7.3.6.1 OpenVMS Library Files
The procedure displays the following message:
* Do you want to install the OpenVMS library files? (Y/N)
The file subclasses of the OpenVMS library (VMS073.C) save set are listed
in Appendix D. If you want to install the VMS073.C files, type Yes and press
Return. If you require network support, you must select the OpenVMS library
component. If you do not want to install the VMS073.C files, type No and press
Return.
7.3.6.2 OpenVMS Optional Files
The procedure displays the following message:
* Do you want to install the OpenVMS optional files? (Y/N)
The file subclasses of the OpenVMS optional (VMS073.D) save set are listed in
Appendix D. If you want to install the VMS073.D files, type Yes and press Return.
If you do not want to install the VMS073.D files, type No and press Return.
7.3.6.3 Help Message Files
The procedure displays the following message:
The Help Message utility (MSGHLP) provides online explanations
and user actions for OpenVMS messages in place of the hardcopy
OpenVMS System Messages and Recovery Procedures Reference Manual,
which is now separately orderable.
The MSGHLP database, MSGHLP$LIBRARY.MSGHLP$DATA, consumes
approximately 10400 blocks and will be placed by default
on your system disk in SYS$COMMON:[SYSHLP] unless you specify an
alternate device when prompted.
* Do you want to install the MSGHLP database? (Y/N)
The Help Message utility is an online database for system messages
documentation. You can install Help Message either on the system disk or on
an alternate disk. If you want to install the Help Message files, type Yes and
press Return.
The procedure displays the following message:
You can install this database on your system disk in SYS$COMMON:[SYSHLP]
or on an alternate device. If you specify an alternate device, but no
directory, MSGHLP$LIBRARY.MSGHLP$DATA is placed in [HELP_MESSAGE]. When
prompted, take the default of the system disk or specify an alternate
device using this format:
device:[directory]
* Where do you want to install the MSGHLP database? [SYS$COMMON:[SYSHLP]]
Space remaining on system disk: 1593110 blocks
The Help Message database is installed in the area you specified.
7–10 Upgrading the OpenVMS VAX Operating System