Installation manual

Preparing to Use OpenVMS Management Station
G.1 Preparing Your OpenVMS System
• If the problem is related to OpenVMS Management Station documentation,
use the Internet address printed in front of this book to send us your
comments.
G.1.13 Removing the OpenVMS Management Station Server
If you use the POLYCENTER Software Installation utility to remove OpenVMS
Management Station from the OpenVMS system, the following files are not
removed:
• TNT$ACS.DAT
• TNT$JOURNAL.TNT$TRANSACTION_JOURNAL
• TNT$SERVER_ERROR.LOG
• TNT$UADB.DAT
• TNT$EMERGENCY_MOUNT.COM
Do not delete these files unless you have already removed OpenVMS Management
Station.
G.2 Preparing Your PC
During the OpenVMS installation or upgrade procedure, you selected the
OpenVMS Management Station client software files to be installed on your
OpenVMS system disk (or you added them later using the DCL command
PRODUCT INSTALL TNT). After you have prepared your OpenVMS system
to run the server software, you must next prepare your PC to run the client
software.
This section includes the following information:
• Required memory and disk space
• Required software
• Installing the client software
• Getting started using OpenVMS Management Station
G.2.1 Required Memory and Disk Space
Your PC requires 13 MB of free disk space to install the OpenVMS Management
Station client software.
G.2.2 Distribution Files
There are two versions of the OpenVMS Management Station client kit:
TNT030_I.EXE for Intel systems (Windows 95 and Windows NT), and TNT030_
A.EXE for Alpha Windows NT systems. Both of these files are located in the
SYS$COMMON:[TNT.CLIENT] directory.
The Intel kit will not install under FX!32 running on Alpha processors; use the
Alpha native kit in this case.
G–8 Preparing to Use OpenVMS Management Station