Installation manual

Rebooting (cont’d)
manually, 3–25
Removing unwanted system files, 4–7
Required save set
transferring to the system disk, 3–5
Restart
enabling automatic, 5–12
Restrictions
for installations, 2–2
Restrictions for Version 7.3, 1–2
Rights database
creating during an installation, 3–17
RIGHTSLIST.DAT file
creating during an installation, 3–17
RMS Journaling for OpenVMS
license registration during an installation,
3–21
Rolling upgrades, 6–2
effect on SYSUAF.DAT, 5–8, 8–2
maintaining cluster quorum, 6–5
restrictions, 6–2, 6–4
source drive requirement, 6–5
upgrade procedures, 6–5 to 6–6
S
Save sets
installing on an alternate disk, 5–14
location on magnetic tape, 1–4
required location, 1–3, 2–1
tape cartridge containing, 3–1
transferring to the system disk, 3–4
SCSNODE parameter, 5–11
SCSSYSTEMID parameter, 5–11
Selecting optional components, 7–9
Shutdowns
before an upgrade, 5–8
Site-specific command procedures
restored during an upgrade, 7–18, 8–3
Software Product Descriptions (SPDs)
See SPDs
Source drives, 1–3
definition, 7–2
requirement for cluster upgrade, 6–5
SPDs (Software Product Descriptions)
location on the distribution kit, 1–4
STABACKIT.COM (procedure to create standalone
BACKUP), 5–7
Standalone BACKUP
booting, 3–1
booting from InfoServers, 3–2
booting from tape cartridges, 3–1
booting on VAX 9000 computers, 3–2
creating a kit, 4–2
creating after an upgrade, 8–11
creating before an upgrade, 5–7
locating on distribution kit, 3–1
upgrade requirements, 5–7
Standalone BACKUP (cont’d)
using alternative backup procedure, 3–4
Startup files
editing after an installation, 4–2
STARTUP_P1 parameter
setting to MIN, 5–10
Swap files
checking size, 8–3
controlling size of, H–3
creating, 5–9
locating, 2–3
modifying size, 8–3
purged during an upgrade, 7–14
recommended location, 5–9
SWAPFILES.COM procedure
executing to change system file sizes, 8–3
to check or modify page file size, 5–9
to create swap file, 5–9
SYCONFIG.COM procedure
editing after an installation, 4–2
SYLOGICALS.COM procedure
editing after an installation, 4–2
SYLOGIN.COM procedure
editing after an installation, 4–2
SYS$TIMEZONE.DAT file, 7–8
[SYSF] directory
booting from during an upgrade, 7–1, 7–15,
C–1
command to boot MicroVAX and VAXstation
computers from, 7–15
[SYSF] directory tree
built by upgrade procedure, 7–9
deletion of, 7–18
SYSGEN parameters
See System parameters
SYSGEN utility
ALLOCLASS parameter, 2–3
configuring devices, 7–2
using to connect console, 8–4
SYSTARTUP_VMS.COM procedure
editing after an installation, 4–2
editing to control DECnet Phase IV for
OpenVMS VAX, 4–4
SYSTEM account
forgotten passwords, 3–26, 7–22
limits, 5–10
quotas, 5–10
setting passwords, 3–16
System disks, 1–2
analyzing and repairing, 5–8
backing up, 8–11
backing up after an installation, 4–2, 4–7
backing up before an upgrade, 5–7
booting a backup copy, 5–8
booting after an installation, 3–25
booting after transferring required save set,
3–7
CLUSTER_SIZE parameter, 3–6
Index–6