Installation manual

Installing the OpenVMS VAX Operating System
3.1 Booting Standalone BACKUP
Processor
Series ISL File Boot Path Designator
VAX 6000 ISL_LVAX_073 EXA0 (DEMNA), FXA0 (DEMFA),
ETA0 (DEBNI) (DEBNA)
VAX 7000 ISL_LVAX_073 EXA0 (DEMNA), FXA0 (DEMFA)
VAX 10000 ISL_LVAX_073 EXA0 (DEMNA), FXA0 (DEMFA)
MicroVAX ISL_SVAX_073 ESA0 (LANCE), XQA0 (DELQA)
VAXstation ISL_SVAX_073 ESA0 (LANCE)
VAXft 110, 310,
410, 610, and 612
ISL_SVAX_073 EPA0 (LANCE)
On a VAX 6000 computer, respond to the prompt as shown in the following
example:
Loading system software.
Filename: ISL_LVAX_073
5. The InfoServer ISL program then displays the following menu:
Network Initial System Load Function
Version 1.2
FUNCTION FUNCTION
ID
1 - Display Menu
2 - Help
3 - Choose Service
4 - Select Options
5 - Stop
Enter a function ID value: 3
Enter 3, as shown in the previous display, for the function ID value. The
following menu is displayed:
OPTION OPTION
ID
1 - Find Services
2 - Enter known Service Name
Enter an Option ID value: 2
Enter 2 for the Option ID value. The following is displayed:
Enter a Known Service Name:
Enter the ISL file name for your processor series from the previous table.
If you need more information, select function ID 2 for help.
6. After you boot standalone BACKUP, the system displays the following:
%BACKUP-I-IDENT, standalone BACKUP V7.3; the date is 11-NOV-2000 10:00
$
After you have booted standalone BACKUP, go to Section 3.2.
Installing the OpenVMS VAX Operating System 3–3