Installation manual

C Booting from [SYSF] During an Upgrade

C.1 Booting Procedures . . ........................................ C–1

C.1.1 MicroVAX and VAXstation Computers . . ....................... C–1

C.1.2 VAX 8530, 8550, 8810 (8700), 8820-N (8800) Computers ........... C–1

C.1.3 VAX 8820, 8830, and 8840 Computers . . ....................... C–2

C.1.4 VAX 8200, 8250, 8300, and 8350 Computers .................... C–2

C.1.5 VAX 8600 and 8650 Computers .............................. C–3

C.1.6 VAX 6000 Series. . ........................................ C–4

C.1.7 VAX 9000 Series. . ........................................ C–5

D OpenVMS VAX Save Set Subclasses

D.1 Save Set C Subclasses ........................................ D–1

D.2 Save Set D Subclasses ........................................ D–2

D.3 Save Set E Subclasses ........................................ D–2

D.4 Save Set F Subclasses ........................................ D–2

E DECwindows Display Server and Fonts Components

E.1 Table of Components . ........................................ E–1

F NEW_OVER and NEW_UNDER Files

F.1 Where Files Are Installed ..................................... F–1

F.1.1 NEW_OVER Files ........................................ F–2

F.1.2 NEW_UNDER Files ....................................... F–2

F.1.3 Site-Speciﬁc Files . ........................................ F–3

G Preparing to Use OpenVMS Management Station

G.1 Preparing Your OpenVMS System ............................... G–1

G.1.1 Setting Up in a Mixed-Architecture Cluster Environment . . . ....... G–2

G.1.2 Start the Server on Other Nodes ............................. G–3

G.1.3 Error Log Information ..................................... G–3

G.1.4 Update the Printer and Storage Database ...................... G–3

G.1.5 Edit the System Files...................................... G–4

G.1.6 Allow OpenVMS Management Station to Control the Printer and

Storage Environment ...................................... G–4

G.1.7 Keeping Your Printer Environment Up to Date . . . ............... G–5

G.1.7.1 When is the Database Updated? . . . ....................... G–5

G.1.7.2 Do You Need to Run TNT$UTILITY.COM Manually? . . . ....... G–6

G.1.7.3 Are There Any Requirements for Running

TNT$UTILITY.COM? . . . ................................ G–6

G.1.8 Keeping Your Storage Environment Up to Date . . . ............... G–6

G.1.9 Enabling Disk Quotas ..................................... G–6

G.1.10 Caching Storage Conﬁguration Data . . . ....................... G–7

G.1.11 Running Third-Party TCP/IP Stacks . . . ....................... G–7

G.1.12 Determining and Reporting Problems . . ....................... G–7

G.1.13 Removing the OpenVMS Management Station Server ............. G–8

G.2 Preparing Your PC . . . ........................................ G–8

G.2.1 Required Memory and Disk Space ............................ G–8

G.2.2 Distribution Files . ........................................ G–8

G.2.3 Required Software ........................................ G–9

G.2.4 Time Required for Installation ............................... G–9