User Guide Vax Careline: AU: 1300 361 505 NZ: 0800 800 900 Steam Cleaner Get Cleaning... What’s your Vax’s model number? W V S T H M 1 6 0 0 What’s your serial number? (Located on the base of the machine) W Note these down in case you need them in future. Please keep instructions for further use. www.vax.com.
Vax Service line AU: 1300 361 505 / NZ: 0800 800 900
Machine Overview 1 2 3 4 5 6 7 8 Carry handle Water tank lid On/off button Steam ready (green LED) Water heating (red LED) Variable steam dial Hose outlet Tool storage Unit 8 1 2 3 5 4 6 7 9 Steam handle and hose a) Extension tube release b) Safety latch c) Steam trigger 10 Metal brush 11 Detail nozzle 12 Small plastic brush 13 Large plastic brush 14 Scraper tool 15 Concentration nozzle 16 Window/upholstery tool 17 Floor head 18 Floor head connector 19 Measuring jug 20 Funnel 21 3pc extension tubes
General Safety Information FOR HOUSE HOLD USE ONLY. 17. When using the steam cleaner, basic safety precautions should always be observed, including the following: ARNING: The steam cleaner unit and W accessories get very hot during operation. DANGER OF SCALDING: Avoid contact with the steam. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. o not leave the steam cleaner unattended when D plugged in.
Operation Operating your steam cleaner To remove lid push down and twist anti-clockwise. Fill measuring jug to the max mark. NOTE: Maximum jug capacity is 700ml ! Insert the funnel into the water tank to make filling the tank easier. Slowly pour liquid into water tank. NOTE: Maximum tank capacity is 1.6L (2.2 jugs) Ensure lid is securely fastened by pushing down and twisting clockwise. Attach hose to unit. Ensure steam handle safety latch is on before heating. Turn steam cleaner on. www.vax.com.
Operation Red light will illuminate when unit is heating. Green light will illuminate when unit is ready to use. Release steam handle safety latch. NOTE: Steam heats up in approx. 12 minutes. NOTE: Steam run per full tank is approx. 40 minutes. Press steam trigger to release steam. Rotate variable steam dial to adjust pressure. Accessories – Extension tubes Attach extension tube to handle. 5 Attach extension tubes together. To remove/release tubes, press latch as shown.
Operation Floor head Attach the floor head connector to the floor head. Rotate floor head connector into place. Lift levers on either side of the floor head to secure floor cloth. Attaching small tools 1. Push small tools onto concentration nozzle aligning arrows. 2. Twist clockwise to fit. NOTE: Concentration nozzle must be attached before fitting the small tools. www.vax.com.
Operation Accessories - Using the small tools IMPORTANT: Test a hidden area before use. Do not use on non-stick surfaces. Concentration nozzle Use to remove soap scum in baths and shower enclosures and to clean heavily soiled areas in kitchens. Brushes Agitate stubborn grease and grime. Metal brush For oven grills and racks. IMPORTANT: Test for colour fastness in a small hidden area of upholstery to check for colour removal before use.
Maintenance (Keep your Vax as good as new) Cleaning cloths Cloths can either be washed by hand or machine washed at 30º C with mild detergent. Storage IMPORTANT: Please ensure the steam cleaner has completely cooled down before storing. IMPORTANT: When storing your machine, turn the unit off at the plug and hold steam trigger down to release remaining steam pressure. Press steam trigger to release steam. www.vax.com.au Ensure steam handle safety latch is on. Empty unit of any remaining water.
FAQ’s WARNING: To reduce the risk of personal injury, unplug the hard floor cleaner before performing maintenance/troubleshooting checks. Problem Solution Is there an accessory missing? Check the parts overview page in this guide to make sure the part is definitely included with your machine. If the part is missing, we’re here to help. Simply call us on: Aus 1300 361 505 or NZ 0800 800 900 What do I do if the machine/an accessory has become damaged or broken? Visit vax.com.au for spares and parts.
Other Information Vax Service & Help Vax Careline: Australia 1300 361 505 New Zealand 0800 800 900 Monday-Friday 8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. For the nearest Service Agent, please call the Vax Customer Careline or visit www.vax.com.
Distributed by Techtronic Industries Pty. Ltd. Level 1, 660 Doncaster Road, Doncaster, Australia 3108. www.vax.com.
